Stereo Tool
https://forums.stereotool.com/

(Updated v1.5 Final III ST 10.30) Prismic Hot (FM)
https://forums.stereotool.com/viewtopic.php?t=33903
Page 1 of 2

Author:  dkr [ Mon Feb 12, 2024 11:38 pm ]
Post subject:  (Updated v1.5 Final III ST 10.30) Prismic Hot (FM)

Tested with Stereo Tool 10.21/ 10.30 (I'll try to update it if there are major changes in ST that affect the sound of the preset)

I would advise to also load the Repair settings.

Input level best at around -6 dB.

Extra drive Composite clipper: +1.00 dB.


Multiple RDS RadioTexts

This is a way to have more changing RDS RadioTexts than the standard A and B ones, with the help of taskt, a free automation program.

I have made a simple example and instructions to set it up in the zip attached.

Attachments:
File comment: Prismic Hot (ST 10.30)
Prismic Hot (ST 10.30).zip [32.22 KiB]
Downloaded 667 times
File comment: Prismic Hot v1.5
Prismic Hot v1.5.zip [32.15 KiB]
Downloaded 598 times
File comment: RDS Radio Texts
RDS RadioTexts.zip [2.69 KiB]
Downloaded 499 times

Author:  dkr [ Tue Feb 13, 2024 7:22 pm ]
Post subject:  Re: Prismic Hot (FM)

Quote:
These is a decent preset only thing that needs to be changed is the treble is a little high
Thanks, maybe I should have mentioned (as I did with the House One XL preset): Might be too much highs for other then FM broadcast, you just can lower them a bit in the EQ.

Author:  mkpetrov [ Wed Feb 14, 2024 5:20 am ]
Post subject:  Re: Prismic Hot (FM)

Sounds great. I'd say trebles are only too high on treble-heavy songs. I experimented with highs in auto eq set to -12 and the de-esser at around -10, sounds better than with lowering highs in the EQ. :)

Author:  dkr [ Wed Feb 14, 2024 2:48 pm ]
Post subject:  Re: Prismic Hot (FM)

Quote:
Sounds great. I'd say trebles are only too high on treble-heavy songs. I experimented with highs in auto eq set to -12 and the de-esser at around -10, sounds better than with lowering highs in the EQ. :)
Thanks!
If you want could you pm me a preset with only the settings of the auto eq and de-esser?
I'm testing an update to the preset at the moment, maybe I can ad them, so people who want to use the preset for other then FM broadcast can turn those on.

Author:  mkpetrov [ Wed Feb 14, 2024 2:59 pm ]
Post subject:  Re: Prismic Hot (FM)

Done. :)

Author:  dkr [ Fri Feb 16, 2024 5:33 pm ]
Post subject:  Re: (Updated v1.1) Prismic Hot (FM)

v1.1 update and a way to have multiple RDS RadioTexts in first post.

Author:  dkr [ Sat Mar 02, 2024 2:08 am ]
Post subject:  Re: (Updated v1.2) Prismic Hot (FM)

Preset completely redone, v1.2 update in first post.

Depending on the frequency response of your setup/transmitter you might try playing a bit with the EQ by lowering/raising the first Gain (30 Hz) or the HF Gain.

Author:  dkr [ Sun Mar 03, 2024 4:04 am ]
Post subject:  Re: (Updated v1.3 Final) Prismic Hot (FM)

v1.3 final in first post, thanks for the comments/contributions.

Author:  dkr [ Fri Mar 08, 2024 11:32 pm ]
Post subject:  Re: (Updated v1.4 Final II) Prismic Hot (FM)

v1.4 Final II up, many changes, sounds much better imho and also should stay within limits much better.

Also has the Noise gate and Speech detection (as far as I can test) set up and activated.

This preset is actually tested on a professional FM transmitter (Suono ESVB) connected via the RF Monitor Out (Test) to a 14bit SDR (RSPduo).
Software used: Youlean Loudness Meter 2 Pro, Orban Loudness Meter, MpxTool and RDS Spy.
Listened to via a Traktor Kontrol S4 (24bit, 96khz soundcard), Beyer Dynamic DT 770 Pro LE headphones and M-Audio BX5 monitor speakers.

Author:  dkr [ Tue Mar 12, 2024 12:57 am ]
Post subject:  Re: (Updated v1.5 Final III) Prismic Hot (FM)

The final of the finals in the first post, I would advise to use this one instead of v1.4 because the phase delay caused some distortion in the bass and should have been off.

Page 1 of 2 All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/