Stereo Tool :: Stereo Tool 10.42 BETA

Yes VST2x64 is fine.

PluginDoctor: it's useful, but can be a pandora's box!

Oh, just realized 1041 VST3x64 is not passing signal at all in any host, though it scans ok. Is general advice here to stay a few feet back from the bleeding edge? (new-ish user),

VST3 should work again in BETA040.

Hi Hans,

I assume you don't release regular version til end of year? :/

Not asking for a friend

Hi Hans

Is there any chance of adding a tick box option when running Parallel Multiband Compression option that changes the scale of the MB2 to mimic the same values or scales used on MB2?

When I started playing with the feature, I thought I had broken it after using the copy MB1 settings.

After a couple of hours away from the PC, I realised that the scales were different and were being true to their values. D'oh!

Anyway, just a thought!

Ross

You mean the display scale? Or parameters?

Author:	MrKlorox [ Mon Dec 02, 2024 4:57 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Quote: Yes VST2x64 is fine. PluginDoctor: it's useful, but can be a pandora's box! Oh, just realized 1041 VST3x64 is not passing signal at all in any host, though it scans ok. Is general advice here to stay a few feet back from the bleeding edge? (new-ish user), On the contrary, I like to stay updated with betas so I can test all the new features in between releases. I try to forward most issues I can't handle to the team and they get taken care of relatively quickly. Unicode was recently added, and I'm assuming the inability to be seen bug is part of that. I bet it'll return to functionality in this coming week. However if you run an on air station, it's recommended to stick with stable releases, unless a specific bug is fixed in a beta that you need.

Author:	hvz [ Tue Dec 03, 2024 11:14 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
VST3 should work again in BETA040.

Author:	Bsound [ Fri Dec 06, 2024 7:06 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Quote: VST3 should work again in BETA040. Thanks.. can report working in Reaper and Sequoia. Still no i/o in Plugin Doctor which weird, I have to check again.

Author:	hvz [ Sat Dec 07, 2024 9:19 pm ]
Post subject:	Re: Stereo Tool 10.42 BETA
Posted BETA044. Now has the ability to create 8 streams instead of 1.

Author:	hvz [ Fri Dec 13, 2024 10:06 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Posted BETA046. MicroMPX via RIST now works without a static IP address at the decoders! (You still need one on the encoder side, but that's likely much easier to achieve). How to use: - Use this new version on BOTH sides. (encoder side can also be Stereo Tool) - Enable RIST on both sides - In the RIST mode pull-down menu, choose the 2nd option on both sides - On the DECODER side, fill in the IP address of the encoder (!) - On the ENCODER side, enable port forwarding in the router. The port number must be EVEN. And the port number + 1 is also used, so enable port forwarding for both. If you use 8854, then forward 8854 and 8855.

Stereo Tool https://forums.stereotool.com/

Stereo Tool 10.42 BETA https://forums.stereotool.com/viewtopic.php?t=34592	Page 8 of 12

Author:	Ek95 [ Mon Dec 16, 2024 12:28 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Hi Hans, I assume you don't release regular version til end of year? :/ Not asking for a friend

Author:	hvz [ Mon Dec 16, 2024 12:44 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Quote: Hi Hans, I assume you don't release regular version til end of year? :/ Not asking for a friend Nah, too many open points that need to be finished. RIST almost works, STXtreme 5 FM instances almost works, STXtreme loopback test almost works, Mac VST3 still has some issues, bunch of things like that. We're using this month to fix a lot of smaller issues like these. But there's only 1 week left so I don't expect to be able to release anything.

Author:	livewireaus [ Tue Dec 17, 2024 2:49 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Hi Hans Is there any chance of adding a tick box option when running Parallel Multiband Compression option that changes the scale of the MB2 to mimic the same values or scales used on MB2? When I started playing with the feature, I thought I had broken it after using the copy MB1 settings. After a couple of hours away from the PC, I realised that the scales were different and were being true to their values. D'oh! Anyway, just a thought! Ross

Author:	hvz [ Tue Dec 17, 2024 9:16 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Quote: Hi Hans Is there any chance of adding a tick box option when running Parallel Multiband Compression option that changes the scale of the MB2 to mimic the same values or scales used on MB2? When I started playing with the feature, I thought I had broken it after using the copy MB1 settings. After a couple of hours away from the PC, I realised that the scales were different and were being true to their values. D'oh! Anyway, just a thought! Ross You mean the display scale? Or parameters?

Author:	livewireaus [ Tue Dec 17, 2024 10:29 am ]
Post subject:	Re: Stereo Tool 10.42 BETA
Quote: You mean the display scale? Or parameters? The display scale. Mirror the scale from MB1 so it is the same in MB2 when linked. Ross

Page 8 of 12	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/