Stereo Tool
https://forums.stereotool.com/

Stereo Tool 7.02 BETA
https://forums.stereotool.com/viewtopic.php?t=4415		 Page 1 of 11
Author:  hvz [ Thu Dec 20, 2012 7:35 pm ]
Post subject:  Stereo Tool 7.02 BETA
Ok, here's the first 7.02 version.

Changes:
1. Better bass handling. Here you see a sweep with both the old and new bass clipper behavior, the new one maintains more mid bass freqs.
Image

2. Plug-in versions: Support for upto 8 channels for declipper, pre-emphasis/de-emphasis, bandpass, clipper, hard limit. If you feed single-channel audio the CPU load is lower then before.

Stand alone: http://www.stereotool.com/download/ster ... 02-001.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 02-001.exe
VST: http://www.stereotool.com/download/vst_ ... 02-001.dll
Command line: http://www.stereotool.com/download/ster ... 02-001.exe
Author:  parelduikerfm [ Thu Dec 20, 2012 7:41 pm ]
Post subject:  Re: Stereo Tool 7.02 BETA
Great!

Sometimes i missing some mid bass.
I will test it this evening! :)
Author:  Wunjo [ Fri Dec 21, 2012 1:30 am ]
Post subject:  Re: Stereo Tool 7.02 BETA
You did the magic! Bass is more powerful now!
Author:  Bojcha [ Fri Dec 21, 2012 2:17 am ]
Post subject:  Re: Stereo Tool 7.02 BETA
With this new beta, I recomend some new (default) settings..

"Distortion" section in "Advanced Clipper"

- Clipping from 0hz up to = 100Hz or 120Hz.
- Drop to no clipping = 300-400Hz. (i am testing 400 now still good)
- Clip bass below = -1dB or lower for louder presets. For mid loud preset -2dB is still good!
- Dynamically reduce bass to = 20% lower then "Clip bass below"

Problem was that area 0-100-400 was flat. now it works as how it suppose to work.. 100 rise to 400Hz.
For audio that meaning more mid-bass especially for louder presets. More kick and punch.
Author:  gpagliaroli [ Fri Dec 21, 2012 2:16 pm ]
Post subject:  Re: Stereo Tool 7.02 BETA
Quote:
With this new beta, I recomend some new (default) settings..

"Distortion" section in "Advanced Clipper"

- Clipping from 0hz up to = 100Hz or 120Hz.
- Drop to no clipping = 300-400Hz. (i am testing 400 now still good)
- Clip bass below = -1dB or lower for louder presets. For mid loud preset -2dB is still good!
- Dynamically reduce bass to = 20% lower then "Clip bass below"

Problem was that area 0-100-400 was flat. now it works as how it suppose to work.. 100 rise to 400Hz.
For audio that meaning more mid-bass especially for louder presets. More kick and punch.
According to the settings that you recommend, but in the case of "Drop to no clipping", after the 250 hz can generate too rumble, mainly for listening in cars.
It would not be beyond that frequency. ;)
Author:  Bojcha [ Fri Dec 21, 2012 5:46 pm ]
Post subject:  Re: Stereo Tool 7.02 BETA
Rumble? Afaik that appiers on lower frequeencies.. also meaning that 2nd slider over 250Hz can just minimize that - if present.
Author:  gpagliaroli [ Fri Dec 21, 2012 7:17 pm ]
Post subject:  Re: Stereo Tool 7.02 BETA
Rumble (translation error) = 180-200 Hz Resonance
"Drop to no clipping" is the second slider.
Author:  Oboy Buster [ Tue Dec 25, 2012 8:01 am ]
Post subject:  Re: Stereo Tool 7.02 BETA
amazing development tool for stereo. I love the stereo tools from the beginning until now. Continue along hvz. success continues for stereo tool. Greetings from me, oboy btsr from Indonesia, jakarta, bali
Author:  hvz [ Wed Dec 26, 2012 12:43 am ]
Post subject:  Re: Stereo Tool 7.02 BETA
The R128 loudness normalizer for the Carbon Coder plugin (Stereo Tool for tv audio processing) now also supports 5.1 audio!

For the EBU test files it calculates the following adjustments to reach -23 LUFS (all must be accurate +/-0.1 dB):
0 Eigen -23 dB toon 1.000004 +0.000034 dB
3341-1 -0.0400 dB
3341-2 +9.966310 dB (file is recorded at -33 dB, so this is correct)
3341-3 +0.020619 dB
3341-4 +0.020619 dB
3341-5 -0.021733 dB
3341-6 +0.021410 dB 5.1 audio
3341-7 +0.000034 dB
3341-8 +0.005201 dB

All passed!
Author:  Chris [ Thu Dec 27, 2012 11:03 am ]
Post subject:  Re: Stereo Tool 7.02 BETA
Hans, as i said in my last post, before realease, it will be nice if on right click on adjusment gets you to last LOAD sts price. Is it fixed, or will be?
I think its time to learn the new GUI on ST version 7.. i am used on last....!!!!!
Beta 7.02 sounds good, but i will check it out further.!
Do i need a new paid key?
Page 1 of 11 All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/