Stereo Tool :: STS settings don't work on command line version

Stereo Tool https://forums.stereotool.com/

STS settings don't work on command line version https://forums.stereotool.com/viewtopic.php?t=4079	Page 1 of 1

Author:	mikebo [ Mon Jan 30, 2012 2:54 am ]
Post subject:	STS settings don't work on command line version
If I save my STS settings file from the winamp plug-in version, shouldn't the same STS file work on the command line version? If so, it appears not to work. Note that the command line version reports it is using the contents of dale.sts, and that Pre Amp setting is x4.00, but in the dale.sts file it clearly shows the setting is x11.32 (+21.00dB). Likewise, the command line version reports Hard Limit is OFF, while the STS file reflects a setting of Hard limit output = 1 (on). Am I doing something wrong? Please advise? Thanks! mikebo Here's the verbose output from the command line version: $ ../bin/stereo_tool_cmd-6.21.exe -s dale.sts -v Fest-2011.wav Fest-2011-proces sed.wav SA STEREO TOOL 6.21 CONSOLE APPLICATION - (C) HANS VAN ZUTPHEN, 2001-2011 Not registered Converting Fest-2011.wav to Fest-2011-processed.wav using settings from dale.sts ---------------------------------------------------------------------------- PRE AMP: x4.00 NOISE GATE: OFF STEREO: ON No_AZIMUTH, No_BOOST, No_STIMAGE AGC: ON target: 35000 (-7.89 dB RMS), clip: 130% (2 bands) PRE-EMPHASIS: OFF MULTIBAND: ON limit: 6270 7290 7290 7120 7120 6780 5420 3560 2200 1190 BANDPASS: OFF BASS BOOST: OFF SINGLE BAND: OFF PHASE ROTATION: OFF FINAL LIMITER: ON x1.00 LOUDNESS: OFF HARD LIMIT: OFF DE-EMPHASIS: OFF POST AMP: x1.00 ---------------------------------------------------------------------------- Encountered RIFF/WAVE header "fmt ", copying 16 bytes Encountered RIFF/WAVE header "data", processing 498624956 bytes DELAY: 8192 samples (4096 stereo samples) 486940K bnd1 bnd2 bnd3 bnd4 bnd5 bnd6 bnd7 bnd8 bnd9 bnd0 input output 3208K ████ ████ ████ ████ ████ ████ ███▀ ████ ████ ████ ▀────── ▀────── While this is the contents of dale.sts: [Common] CPU usage - Quality (new style)=1 Latency (samples)=4096 Pre amplifier=11.319999695 Post amplifier=0.980000019 Extra loudness=1.409999967 Extra loudness - Very deep bass relative clipping level=0 Extra loudness - De-esser limit=65650 Extra loudness - Deep bass protection - Enabled=1 Extra loudness - Deep bass protection - Difference=0 Extra loudness - Deep bass protection - Value=0.787250042 Extra loudness - Forcibly remove DC component caused by Loudness=0 Extra loudness - Reflection strength=0.099999994 Extra loudness - Dirty Bass=0 Extra loudness - Allow more distortion=0 Extra loudness - Allow more distortion - highs=0 Extra loudness - Advanced Highs Protection enabled=1 Extra loudness - Advanced Highs Protection - Strength=4 Extra loudness - Advanced Highs Protection - Maximum reduction=1 Extra loudness - New Bass Protection - Clip very deep bass at=0.899999976 Extra loudness - Voice vibrations - Never reduce bass below=0 Extra loudness - Voice vibrations - Allowed graininess multiplication=1 Extra loudness - Non constant sound vibrations - Sensitivity=1 Extra loudness - New Bass Protection - Strict clipping frequency 1=30 Extra loudness - New Bass Protection - Strict clipping frequency 2=350 Extra loudness - New Bass Protection - Strict clipping - Never dynamically raise bass level above=1 Oversample limiters=1 Extra loudness - Take some shortcuts (CPU)=1 Extra loudness - Advanced Extreme Highs Protection - Never clip below=0.800000012 Extra loudness - Advanced Extreme Highs Protection - Always clip below=1.700000048 Extra loudness - Advanced Extreme Highs Protection - Maximum low/mid frequency volume reduction=0.709999979 Bass protection - Enabled=1 Bass protection - Two steps=1 Bass protection - Clip level=140 Bass protection - Deep bass boost=6.449999809 Bass protection - Raise clip level if highs get above=150 Bass protection - Maximum clip level raise=40.540000916 Extra loudness - Clipping strictness=10 Bass protection - Smoothe mid frequencies=4 Bass protection - Smoothe peak detection steepness=0.100000001 Bass protection - Allowed highs distortion=0 Extra loudness - Advanced Extreme Highs Protection=1 Extra loudness - Advanced Extreme Highs Protection - Keep transients=1 Extra loudness - Take oversampling shortcuts=1 Extra loudness - Bass protection - Bass clipping strictness=4 Extra loudness - Highs vs bass protection - strictness=3 Hard limit output=1 [Declipper] Enabled=1 Analog input=0 Maximum restored peak=4 Quality=25 Reduction precision=0.870000005 Maximum expected distortion level=0.110000007 Definitely clipped if below (relative)=0.974999964 Probably clipped if below (relative)=0.774999976 Maybe clipped if below (relative)=0.649999976 Not clipped if below (absolute)=4096 Clipping straight line margin=0.199999988 Clipped if below short term margin=0.199999988 Clipped if below short term margin Enabled=1 Only declip if tilt can be determined=1 Do not allow restored peaks to be lower than clipped signal=0 Do not reconstruct if reconstructed signal resembles original - threshold=1 Do not reconstruct if reconstructed signal resembles original - texture threshold=1 Amount of peak samples to remove - long term=0.100000001 Amount of peak samples to remove - short term=0.400000006 Tilt default level=0 Tilt maximum adjustment per measurement=0.027777778 Tilt level detection enabled=1 Tilt minimum level=-0.125 Tilt maximum level=0.125 Only declip if clipping histogram spike is symmetrical=0 Declip if (type)=3 Declip if type 4 long term margin=0.920000017 Dynamically increase probably clipped level=1 Dynamically increase maybe clipped level=1 Veil normal down speed (dB/ms)=2 Veil after spike down speed (dB/ms)=4 Veil speed drop time reduction time after spike (ms)=1 Veil margin=0.899999976 MP3 margin=0.924999952 MP3 number of samples=1 Display - Show input=1 Display - Show tilted=0 Display - Show output=0 Display - Show output big=1 [Natural Dynamics] Enabled=0 Difference=0 After AGC=0 Expected input level=3 Effect strength=1 Smooth time=16 Keep transients=1 Half value time=0.150000006 Expected maximum volume - Band 1=7494.120117188 Expected maximum volume - Band 2=7494.120117188 Expected maximum volume - Band 3=7319.359863281 Expected maximum volume - Band 4=7319.359863281 Expected maximum volume - Band 5=6969.840332031 Expected maximum volume - Band 6=5571.760253906 Expected maximum volume - Band 7=3659.679931641 Expected maximum volume - Band 8=2261.600097656 Expected maximum volume - Band 9=1223.320068359 Maximum relative boost - Band 1=1 Maximum relative boost - Band 2=1 Maximum relative boost - Band 3=1 Maximum relative boost - Band 4=1 Maximum relative boost - Band 5=1 Maximum relative boost - Band 6=1 Maximum relative boost - Band 7=1 Maximum relative boost - Band 8=1 Maximum relative boost - Band 9=1 [FM Hiss] Enabled=0 Difference=0 FM median pos=25 FM measure max multiplier=2 FM reduce=150 FM delay=2.5 FM delay median=7.502121449 [Noise Gate] Enabled=1 Difference=0 Noise level=2.5 Relative noise gate level - Band 1=1 Relative noise gate level - Band 2=1 Relative noise gate level - Band 3=1 Relative noise gate level - Band 4=1 Relative noise gate level - Band 5=1 Relative noise gate level - Band 6=1 Relative noise gate level - Band 7=1 [Singleband Compressor] Enabled=1 Difference=0 Maximum volume=2.5 Attack speed=0.001250285 Decay speed=0.999000013 Above Top Limiter=0.159999996 AGC RMS style Enabled=0 AGC RMS style Target RMS level=25000 AGC RMS style Remove remaining peaks above=1.5 [Pre Compressor] Enabled=1 Maximum volume - Band 1=15250 Attack speed - Band 1=0.000004184 Attack speed - Band 3=0.000005001 Minimum attack speed near top=0 Force volume down if it is kept too much above calculated target level margin=2 Decay speed - Band 1=0.004196932 Decay speed - Band 3=0.000249943 Dual band=1 Third band=1 Relative expected volume of highs=0.649999976 Relative maximum volume of highs=2.5 Relative maximum volume of very highs=0.330000013 Remove remaining peaks above (relative to maximum volume)=2 Remove remaining peaks above (relative to maximum volume) - band 2=2 Remove remaining peaks in mono=1 Startup input level=0 Maximum expected dynamics strength for smoothing=1 Enable smoothing=0 Smoothing time=0 Gating level=0 Use ITU-BS.1770 Head=0 Use ITU-BS.1770 Bass=0 Channel separation=0.300000012 Gating based on volume before Pre Amp=0 Lock bass to band 2 strength=0.5 [Pre Compressor Bass] Enabled=1 Maximum relative volume=1.200000048 Attack speed=0.000050317 Decay speed=0.00214558 Remove remaining peaks above (relative to maximum volume)=1 [Multiband Compressor] Enabled=1 Difference=0 Delay enabled=0 Maximum volume - Band -1=9940 Maximum volume - Band 0=9830 Maximum volume - Band 1=9320 Maximum volume - Band 2=6780 Maximum volume - Band 3=4750 Maximum volume - Band 4=2740 Maximum volume - Band 5=2210 Maximum volume - Band 6=1680 Maximum volume - Band 7=1470 Maximum volume - Band 8=1190 Attack speeds linked=0 Attack speed - Band -1=0.000124942 Attack speed - Band 0=0.000263932 Attack speed - Band 1=0.000263932 Attack speed - Band 2=0.000460527 Attack speed - Band 3=0.000529884 Attack speed - Band 4=0.004174663 Attack speed - Band 5=0.011270862 Attack speed - Band 6=0.014298059 Attack speed - Band 7=0.017522397 Attack speed - Band 8=0.012147781 Decay speeds linked=0 Decay speed - Band -1=0.075276032 Decay speed - Band 0=0.075276032 Decay speed - Band 1=0.075276032 Decay speed - Band 2=0.066033408 Decay speed - Band 3=0.066033408 Decay speed - Band 4=0.066033408 Decay speed - Band 5=0.066033408 Decay speed - Band 6=0.066033408 Decay speed - Band 7=0.066033408 Decay speed - Band 8=0.075276032 Above Top Limiter=1 Clipping enabled=1 Postprocessing enabled=1 Flat frequency response enabled=1 Relative clip position - Band -1=1.500000238 Relative clip position - Band 0=1.500000238 Relative clip position - Band 1=1.500000238 Relative clip position - Band 2=1.500000238 Relative clip position - Band 3=1.500000238 Relative clip position - Band 4=1.500000238 Relative clip position - Band 5=1.500000238 Relative clip position - Band 6=1.500000238 Relative clip position - Band 7=1.500000238 Relative clip position - Band 8=1.500000238 Final limiter value=1 Final limiter decay speed=0.999000013 Final limiter clipping=1.56410265 Channel separation steepness protection enabled=1 Channel separation steepness (maximum artifact strength)=0.300000012 Voice protection strength=1 Band 1+2 locking strength=0 Equalizer enabled=1 Equalize before multiband-compression=1 Equalizer position - Band -1=1.985074759 Equalizer position - Band 0=1.56410265 Equalizer position - Band 1=1.247190952 Equalizer position - Band 2=1 Equalizer position - Band 3=1 Equalizer position - Band 4=1 Equalizer position - Band 5=1 Equalizer position - Band 6=1 Equalizer position - Band 7=1.247190952 Equalizer position - Band 8=1.409638405 Center frequency - Band -1=43.06640625 Center frequency - Band 0=86.1328125 Center frequency - Band 1=172.265625 Center frequency - Band 2=344.53125 Center frequency - Band 3=689.0625 Center frequency - Band 4=1378.125 Center frequency - Band 5=2756.25 Center frequency - Band 6=5512.5 Center frequency - Band 7=10000 Center frequency - Band 8=15000 [Stereo] Enabled=3 Stereo AZIMUTH Enabled=1 Stereo Image Enabled=0 Stereo Boost Enabled=1 Stereo Boost Excessive Reverb Protection Enabled=0 Delay enabled=0 Difference=0 Center bass=0 AZIMUTH limit=60.000003815 AZIMUTH change speed=0.200000003 Image phase amplifier=2 Image phase amplifier maximum angle=180 Image phase amplifier maximum separation strength=100 Image width amplifier=1 Extra phase shift=0 Mono or stereo only=0 Stereo Boost strength=1 Stereo Boost maximum amplification=3 Stereo Boost multiplier=1 Stereo Boost - Never reduce below original level=1 [Channel Delay] Enabled=0 Left Delay=0 [Output Filter] Enabled=1 Lowpass filter=19680 Highpass filter=25 Highpass filter linearity=Auto Non-phase-linear highpass filter order=6 Highpass post filter=1 Highpass post filter - avoid artifacts=1 [Bass Boost] Enabled=1 Strength=0.206900001 Start lowpass frequency of input filter=260 End lowpass frequency of input filter=400 Start lowpass frequency of output filter=450 End lowpass frequency of output filter=550 Clip level=1.5 Clip level is relative to estimated maximum level=1 Preserve louder peaks=1 Difference=0 [Phase Rotator] Enabled=0 Start frequency=700 Start speed=1400 Number of rotations=4 Smoothness=0.979999959 Low latency look back samples=112 Low latency look ahead samples=20 [Final Limiter] Enabled=1 Difference=0 Pre-amp=1 Pre-limiter enabled=1 Pre-limiter relative volume=1.75 Reduced CPU processing=0 [FM Transmitter] Enabled=0 Pre-emphasize=0 Pre-emphasis time=50 Output is pre-emphasized=0 Stereo encoder enabled=0 RDS encoder enabled=0 Pilot signal volume=9 RDS signal volume=4.5 FM overdrive volume=1 RDS PS text=2s:STEREO/2s:TOOL/<1=1.5s,2..-2=2t,-1=1.5s:WWW.STEREOTOOL.COM RDS RadioText text=60s:Stereo Tool: Professional Audio Processing - www.stereotool.com/30s:Stereo Tool by Hans van Zutphen, 1999-2008 - www.stereotool.com RDS PTY=0 RDS PI=65535 RDS Alternative frequency 1=0 RDS Alternative frequency 2=0 RDS Alternative frequency 3=0 RDS Alternative frequency 4=0 RDS Alternative frequency 5=0 RDS Alternative frequency 6=0 RDS Alternative frequency 7=0 RDS Alternative frequency 8=0 RDS Alternative frequency 9=0 RDS Alternative frequency 10=0 RDS Alternative frequency 11=0 RDS Alternative frequency 12=0 RDS Alternative frequency 13=0 RDS Alternative frequency 14=0 RDS Alternative frequency 15=0 RDS Alternative frequency 16=0 RDS Alternative frequency 17=0 RDS Alternative frequency 18=0 RDS Alternative frequency 19=0 RDS Alternative frequency 20=0 RDS Alternative frequency 21=0 RDS Alternative frequency 22=0 RDS Alternative frequency 23=0 RDS Alternative frequency 24=0 RDS Alternative frequency 25=0 RDS TP=0 RDS TA=0 RDS Music=1 RDS Artificial Head=0 RDS Compressed=1 RDS Dynamic PTY=0 RDS RadioText Enabled=1 RDS ClockTime Enabled=1 FM Transmitter Calibration Enabled=0 MPX Oversampling mode=Follow main Quality setting FM Transmitter Calibration - Volume 20 Hz=1 FM Transmitter Calibration - Volume 40 Hz=1 FM Transmitter Calibration - Volume 80 Hz=1 FM Transmitter Calibration - Volume 160 Hz=1 FM Transmitter Calibration - Volume 320 Hz=1 FM Transmitter Calibration - Volume 640 Hz=1 FM Transmitter Calibration - Volume 1280 Hz=1 FM Transmitter Calibration - Volume 2560 Hz=1 FM Transmitter Calibration - Volume 5120 Hz=1 FM Transmitter Calibration - Volume 10240 Hz=1 FM Transmitter Calibration - Volume 19000 Hz=1 FM Transmitter Calibration - Volume 23000 Hz=1 FM Transmitter Calibration - Volume 28000 Hz=1 FM Transmitter Calibration - Volume 33000 Hz=1 FM Transmitter Calibration - Volume 38000 Hz=1 FM Transmitter Calibration - Volume 43000 Hz=1 FM Transmitter Calibration - Volume 48000 Hz=1 FM Transmitter Calibration - Volume 53000 Hz=1 FM Transmitter Calibration - Volume 57000 Hz=1 FM Transmitter Calibration - Phase shift 20 Hz=0 FM Transmitter Calibration - Phase shift 40 Hz=0 FM Transmitter Calibration - Phase shift 80 Hz=0 FM Transmitter Calibration - Phase shift 160 Hz=0 FM Transmitter Calibration - Phase shift 320 Hz=0 FM Transmitter Calibration - Phase shift 640 Hz=0 FM Transmitter Calibration - Phase shift 1280 Hz=0 FM Transmitter Calibration - Phase shift 2560 Hz=0 FM Transmitter Calibration - Phase shift 5120 Hz=0 FM Transmitter Calibration - Phase shift 10240 Hz=0 FM Transmitter Calibration - Phase shift 19000 Hz=0 FM Transmitter Calibration - Phase shift 23000 Hz=0 FM Transmitter Calibration - Phase shift 28000 Hz=0 FM Transmitter Calibration - Phase shift 33000 Hz=0 FM Transmitter Calibration - Phase shift 38000 Hz=0 FM Transmitter Calibration - Phase shift 43000 Hz=0 FM Transmitter Calibration - Phase shift 48000 Hz=0 FM Transmitter Calibration - Phase shift 53000 Hz=0 FM Transmitter Calibration - Phase shift 57000 Hz=0 [Lossy compression output optimization] Enabled=1 Spike Protation pre-emphasis time=15 [Side Channels] Channel 1 Enabled=0 Channel 2 Enabled=0 Channel 1 Volume=10 Channel 2 Volume=10 Lowpass frequency=7000 [Direct soundcard access] Enabled=0 Device ID=Microsoft Sound Mapper Volume=1 Buffer size=1 Send to Winamp=Nothing ASIO Override channel 1=4 ASIO Override channel 2=5 [Low latency output] Enabled=0 Device ID=ERROR: INVALID DEVICEID Volume=1 Buffer size=0.080000006 ASIO Override channel 1=2 ASIO Override channel 2=3

Page 1 of 1	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/