Stereo Tool
https://forums.stereotool.com/

Stereo Tool 7.71 BETA
https://forums.stereotool.com/viewtopic.php?t=6087		 Page 29 of 35
Author:  hvz [ Sun Aug 02, 2015 4:05 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
WOW, strange !
You know that i was told everyone that "AMD sees them all" , but now it looks that even that "Amd sees them right" (not wrong).
This is in case Bojcha has an Intel too :)
Intel normally also reports ffffffffffffffff, I'm not sure what's going on here. It could still be that there are 2 bugs (but if so, they show up in the same line of code).
Author:  DJ-DOGGY [ Sun Aug 02, 2015 5:11 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Exeption reported by me is fixed.....

Memory usage increased by around 6-7 Mb compared to beta21
Author:  hvz [ Sun Aug 02, 2015 6:22 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
Exeption reported by me is fixed.....

Memory usage increased by around 6-7 Mb compared to beta21
Huh? It should be decreased further...
Author:  2Sense [ Sun Aug 02, 2015 6:29 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
40% but look at the "per core" load . If you have one of the cores at 100% it`s 100% sure that you will hear sound issues.
I repeat this is a guess and only want to help to ignore "third party" conditions.
Thanks - load per core also looks fine from what I can see. This is being run under the same conditions on a test pc so there shouldn't be anything else too problematic in terms of software / CPU load issues - I can keep an eye out for what you suggest though.
Quote:
Are you using 'Synchronize to output' in the input sound card settings? Or 'FM Transmitter synchronization'?
Synchronize to output is off. FM transmitter synchronization was ticked but greyed out - I've subsequently disabled that now.
Quote:
By the way, did you also test version 020? Or any older one? It would help to know when it started...

I just received a report from someone else who reported "small jitters" in the audio in 017, after running it for 2 days. So, it might have been there a while already.
Yes - I've tried earlier betas and I suspect this is possible - I normally just run the new betas for a few hours for a while when mucking about / listening to music so it's hard to tell for sure.

I'm trying Beta 022 now. I think I heard another glitch but they are so few and far between it's difficult to be sure exactly what's happening.
Something else - enabling FM Tilt correction seems to lock up the GUI. Having a look at the exception log :

Exception in: Display VU Meters (Exception 0xc0000005 at address 0x1bef658, read/write=0, r/w location=0x11c). Offset-info: 0x13756d4
Restarting: NO
Author:  DJ-DOGGY [ Sun Aug 02, 2015 6:32 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
If you don`t use synchronize option , you will get after some time "empty buffer" and then is almost 100% sure you can get those glitchesor whatever you call it.

I again will said: if you can , record them , i want to hear what is it , so i can tell you if i have them too
Author:  DJ-DOGGY [ Sun Aug 02, 2015 6:33 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
Quote:
Exeption reported by me is fixed.....

Memory usage increased by around 6-7 Mb compared to beta21
Huh? It should be decreased further...

mmm, no
Beta21 was around 124 000 kB , beta 22 shows around 130 000 kb


EDIT : COnfirm the locking up the GUI when Enable the tilt correction.Then it start locked up after close.
Exactly same text in ST log.
Author:  hvz [ Sun Aug 02, 2015 6:46 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
If you don`t use synchronize option , you will get after some time "empty buffer" and then is almost 100% sure you can get those glitchesor whatever you call it.

I again will said: if you can , record them , i want to hear what is it , so i can tell you if i have them too
Only if you use different sound cards for input and output (a virtual cable is also a sound card). Those glitches would get very bad after a while, so it could be that - but the buffer meter would show something.
Author:  DJ-DOGGY [ Sun Aug 02, 2015 6:53 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Quote:
Quote:
If you don`t use synchronize option , you will get after some time "empty buffer" and then is almost 100% sure you can get those glitchesor whatever you call it.

I again will said: if you can , record them , i want to hear what is it , so i can tell you if i have them too
Only if you use different sound cards for input and output (a virtual cable is also a sound card). Those glitches would get very bad after a while, so it could be that - but the buffer meter would show something.

Yes, only with different .
You mean if i use Realtek Input for input and Realtek Output as output , i can disable the synchro and buffer will not empty after some hours/days ?

For the buffer : I see that in 7.60(may be in 7.70 too) the input buffer meter is solid at 100% .
But in last betas( may be at the begginning of developing 7.71) it shows some very little jumpings around "the 100%".
I`m not saying it`s a bug , may be this is the right behavour, not like it was.
Size is at default 0.000 sec
Author:  evrenselFM [ Sun Aug 02, 2015 8:22 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
stereo image, or the program may be a better stereo booster stereospecific expander plug-in has to be very bad sound discrimination
Author:  hvz [ Sun Aug 02, 2015 10:40 pm ]
Post subject:  Re: Stereo Tool 7.71 BETA
Cause of crashes in Tilt correction is fixed now - I will run a new build.
Page 29 of 35 All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/