Not knowing what precisely to look for, here are a couple of screen shots. There is nothing listed for when ST failed, only for when I rebooted it. Let me know what you'd like to see.
| Stereo Tool https://forums.stereotool.com/ |
|
| Computer lockup. Running version 7.24 https://forums.stereotool.com/viewtopic.php?t=5040 |
Page 3 of 6 |
| Author: | hvz [ Mon Dec 16, 2013 3:06 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Quote: Here's an oddity... The preset I use is labeled "Phil 3". But, when I reboot the computer, ST comes back with a previous preset "Phil 1". It did this in November, too... Weird.
It stores the settings when you close it or minimize it. If you never did that and the pc rebooted, then you'll get back to the latest saved settings. So this is not related to the problems.
|
|
| Author: | hvz [ Mon Dec 16, 2013 3:06 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
O, have you checked the Windows log again? |
|
| Author: | HadYourPhil [ Mon Dec 16, 2013 3:20 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Not yet. I've been putting out other Monday morning fires, but will do so in a few minutes. |
|
| Author: | HadYourPhil [ Mon Dec 16, 2013 3:52 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Not knowing what precisely to look for, here are a couple of screen shots. There is nothing listed for when ST failed, only for when I rebooted it. Let me know what you'd like to see.
|
|
| Author: | HadYourPhil [ Mon Dec 16, 2013 3:59 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
I reloaded Phil 3. Saved it. Closed the screen. Rebooted the computer. It came back as Phil 1. |
|
| Author: | oldiesstation [ Mon Dec 16, 2013 4:15 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
I have never seen software cause an Event ID 129 error. If you are seeing Event ID 129 errors in your event logs, then you should start investigating the storage .May have a faulty SSD. Problem is definitely NOT ST. |
|
| Author: | HadYourPhil [ Mon Dec 16, 2013 4:31 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Thank you. That's the reason I posted those screen shots so that you guys could spot things I overlook. |
|
| Author: | hvz [ Mon Dec 16, 2013 4:51 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Please answer all questions or it will remain vague. When you say that ST didn't respond to commands, does that means that the rest of Windows was still working or was the whole pc dead? Also, last time you said you had this error (which indicates power issues), am I right that this didn't happen this time? http://www.tomshardware.co.uk/forum/462 ... event-task# |
|
| Author: | Bojcha [ Mon Dec 16, 2013 5:58 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
Smells like ssd/hdd and/or PSU. - Use good quality PSU with 80Plus gold sertificate. Don't look at wattage - it means nothing. - Check for motherboard bios update and turn off C1 and other (if any) "states" - Don't use Kingston SSDs! - Update/check motherboard/chipset drivers. - Run Memory Check! Use Memtest USB version. Burn on USB and boot. http://www.memtest.org/ |
|
| Author: | hvz [ Mon Dec 16, 2013 6:34 pm ] |
| Post subject: | Re: Computer lockup. Running version 7.24 |
The problem is that all of this will take time - so you need a 2nd pc anyway to be able to do this. So, take another pc and plug it in instead... Then you can investigate what's wrong with this one. My guess is that you'll have the same issue if you don't run Stereo Tool at all. (But please answer the question about what exactly didn't respond first - that should also indicate a lot). By the way: Just out of curiosity: Is this a new pc or an older one? Consumer or industrial? And if it's close to a transmitter: How well is it shielded against EMC? |
|
| Page 3 of 6 | All times are UTC+02:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|