Stereo Tool :: Stereo Tool 9.91/9.92 BETA

Quote:

Did something recetly changed in MB "Dynamic speeds" ?

i see much difference between 9.82 and 9.92 in "max speedup" and "max slowdown" numbers. Now checking is it working same...

The display changed. Say your main dyn adjustment setting is set to x/ 2. So it can speed up or slow down by at most a factor 2.

Now you can change the behavior for speedup and for slowdown. So let's say you want to increase the maximum difference by a factor 1.5, to get a maximum speedup or slowdown of a factor 3.

9.82 showed 1.50 (3.00)
9.92 only shows the resulting value, 3.00.

But did audio changed? If i load preset from 9,92 to 9.82 will it be same?

Quick tests with ARM uMPX Decoder BETA047; stream is not received on the decoder end. Back to BETA040 works again. Is this something that went broken when you have added that several port listenings? I can continue tests tomorrow if you can't easily reproduce that.

Edit: Whoops. So, in one of the system network calls, there is a parameter called "nfds", "number of file descriptors" (which in this case means number of network sockets). So, if you have 1 socket open, I expected that I needed to send a 1. But no, that would have been too logical. The number that we need to give it is the ID of the highest socket, plus 1.

Changing it to 1 worked in Windows, but not in Linux. I thought I had fixed a bug when I changed this. But I actually introduced one. Sorry! Next build will be ok again.

It's there. BETA048. (No ARM 32 bit build yet though, 64 bit is there).

Currently running the BETA on Mac M1 12.5.1, Nuendo 12. When opening a preset that's working on Intel the software crashes.
Found out that the 2 band AGC triggers this crash. When switching so singleband the problem is solved.
However, when switching back to 2 bands the software does not crash, but does not let audio thru.

Is this an known issue?

Author:	hvz [ Sat Aug 27, 2022 2:38 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quote: Quote: Quote: Did something recetly changed in MB "Dynamic speeds" ? i see much difference between 9.82 and 9.92 in "max speedup" and "max slowdown" numbers. Now checking is it working same... The display changed. Say your main dyn adjustment setting is set to x/ 2. So it can speed up or slow down by at most a factor 2. Now you can change the behavior for speedup and for slowdown. So let's say you want to increase the maximum difference by a factor 1.5, to get a maximum speedup or slowdown of a factor 3. 9.82 showed 1.50 (3.00) 9.92 only shows the resulting value, 3.00. But did audio changed? If i load preset from 9,92 to 9.82 will it be same? No, the audio is the same, this change is display only.

Author:	janne [ Mon Aug 29, 2022 12:35 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quick tests with ARM uMPX Decoder BETA047; stream is not received on the decoder end. Back to BETA040 works again. Is this something that went broken when you have added that several port listenings? I can continue tests tomorrow if you can't easily reproduce that.

Author:	hvz [ Mon Aug 29, 2022 4:26 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quote: Quick tests with ARM uMPX Decoder BETA047; stream is not received on the decoder end. Back to BETA040 works again. Is this something that went broken when you have added that several port listenings? I can continue tests tomorrow if you can't easily reproduce that. Ah, confirmed. It works in Windows but apparently not on Linux (both x86 and ARM linux builds don't work). There was one bit of code that looked very bizarre, I'm now wondering if it was correct anyway. Edit: Whoops. So, in one of the system network calls, there is a parameter called "nfds", "number of file descriptors" (which in this case means number of network sockets). So, if you have 1 socket open, I expected that I needed to send a 1. But no, that would have been too logical. The number that we need to give it is the ID of the highest socket, plus 1. Changing it to 1 worked in Windows, but not in Linux. I thought I had fixed a bug when I changed this. But I actually introduced one. Sorry! Next build will be ok again.

Author:	janne [ Mon Aug 29, 2022 6:31 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quote: Edit: Whoops. So, in one of the system network calls, there is a parameter called "nfds", "number of file descriptors" (which in this case means number of network sockets). So, if you have 1 socket open, I expected that I needed to send a 1. But no, that would have been too logical. The number that we need to give it is the ID of the highest socket, plus 1. Changing it to 1 worked in Windows, but not in Linux. I thought I had fixed a bug when I changed this. But I actually introduced one. Sorry! Next build will be ok again. Thanks for the explanation! Waiting for the new build.

Author:	hvz [ Wed Aug 31, 2022 12:08 am ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
It's there. BETA048. (No ARM 32 bit build yet though, 64 bit is there).

Stereo Tool https://forums.stereotool.com/

Stereo Tool 9.91/9.92 BETA https://forums.stereotool.com/viewtopic.php?t=32702	Page 16 of 26

Author:	janne [ Wed Aug 31, 2022 11:57 am ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quote: It's there. BETA048. (No ARM 32 bit build yet though, 64 bit is there). Thanks! Works like a charm.

Author:	octavafm [ Fri Sep 02, 2022 8:40 am ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Problem with multipath configuration. When activating the Multipath option and closing StereoTool, once it is reopened, the option always appears disabled. ST 9.92 B48 - Standalone - 64bit - Windows 10 Home Attachment: Multipath.jpg [ 45 KiB \| Viewed 2966 times ] Best regards from Chile

Author:	marnix [ Sat Sep 03, 2022 11:56 am ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Currently running the BETA on Mac M1 12.5.1, Nuendo 12. When opening a preset that's working on Intel the software crashes. Found out that the 2 band AGC triggers this crash. When switching so singleband the problem is solved. However, when switching back to 2 bands the software does not crash, but does not let audio thru. Is this an known issue?

Author:	hvz [ Sat Sep 03, 2022 1:52 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
Quote: Currently running the BETA on Mac M1 12.5.1, Nuendo 12. When opening a preset that's working on Intel the software crashes. Found out that the 2 band AGC triggers this crash. When switching so singleband the problem is solved. However, when switching back to 2 bands the software does not crash, but does not let audio thru. Is this an known issue? No. Is this is a built-in preset? If so, which one iffi not, can you send me the preset file in a PM? Then I can check it here.

Author:	KevGP [ Sat Sep 24, 2022 10:34 pm ]
Post subject:	Re: Stereo Tool 9.91/9.92 BETA
The web interface no longer works. The controls don't do anything when I slide them around.

Page 16 of 26	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/