Stereo Tool :: RDS Information over TCP/IP or Serial?

Serial number will no longer be visible in version 4.04, which will be released later tonight... (This version also fixes a bug that caused hangups in certain circumstances, and will perform slightly better on single core systems.)

If possible I would prefer some tool that produces low-level RDS data which I can just broadcast directly without any intelligence. If that doesn't work, there should actually be two things: A web interface would be nice (eg. Stereo Tool would provide a web page where the RDS data can be edited), but support from existing tooling for hardware solutions would also be very useful. So it's not that easy to quickly make something that works for all situations.

Hi Hans,

Another idea which might work out an might be simple to implement and might have other advantages.

Like in Bojcha's situation the pc is visible to other people who should not have control over the device.
Isn't there a way to password protect certain pages of stereotool or stereotool in total?
Might be easier to show the application but every change must be done ater the correct PW has been entered.

As for the RDS and changing PI, TA etc it should be possible to work with XML files
If the program polls for changes that are made in an XML file and inserts the values into its own encoder it should be easy and should solve the problems for the 2 gentlemen above.
A 1 sec poll would be fast enough and shouldn't consume that much cpu etc.

If someone has access to the PC, password protection won't help at all - they could just close Stereo Tool altogether, change some settings in the .ini file (or remove it), and start it up again.

Author:	Bojcha [ Sun Jul 19, 2009 2:21 am ]
Post subject:	Re: RDS Information over TCP/IP or Serial?
Quote: Serial number will no longer be visible in version 4.04, which will be released later tonight... (This version also fixes a bug that caused hangups in certain circumstances, and will perform slightly better on single core systems.) Good news. Quote: If possible I would prefer some tool that produces low-level RDS data which I can just broadcast directly without any intelligence. If that doesn't work, there should actually be two things: A web interface would be nice (eg. Stereo Tool would provide a web page where the RDS data can be edited), but support from existing tooling for hardware solutions would also be very useful. So it's not that easy to quickly make something that works for all situations. I am not programmer.. so i can't help much. I like idea of web interface form ST it's better then separate tool. Good point!

Author:	Luke [ Sun Jul 19, 2009 10:22 am ]
Post subject:	Re: RDS Information over TCP/IP or Serial?
Hi Hans, Another idea which might work out an might be simple to implement and might have other advantages. Like in Bojcha's situation the pc is visible to other people who should not have control over the device. Isn't there a way to password protect certain pages of stereotool or stereotool in total? Might be easier to show the application but every change must be done ater the correct PW has been entered. As for the RDS and changing PI, TA etc it should be possible to work with XML files If the program polls for changes that are made in an XML file and inserts the values into its own encoder it should be easy and should solve the problems for the 2 gentlemen above. A 1 sec poll would be fast enough and shouldn't consume that much cpu etc.

Author:	hvz [ Sun Jul 19, 2009 11:30 am ]
Post subject:	Re: RDS Information over TCP/IP or Serial?
Quote: Hi Hans, Another idea which might work out an might be simple to implement and might have other advantages. Like in Bojcha's situation the pc is visible to other people who should not have control over the device. Isn't there a way to password protect certain pages of stereotool or stereotool in total? Might be easier to show the application but every change must be done ater the correct PW has been entered. As for the RDS and changing PI, TA etc it should be possible to work with XML files If the program polls for changes that are made in an XML file and inserts the values into its own encoder it should be easy and should solve the problems for the 2 gentlemen above. A 1 sec poll would be fast enough and shouldn't consume that much cpu etc. If someone has access to the PC, password protection won't help at all - they could just close Stereo Tool altogether, change some settings in the .ini file (or remove it), and start it up again. Something very close to the XML solution is already implemented in Stereo Tool: It is already polling a settings file 4 times a second if you turn that option on. However, that needs to be done manually at the moment by editing the .ini or an .sts file. I have never put this in the official documentation (I really need to rewrite some parts of it), but here's a forum post with an explanation: viewtopic.php?f=16&t=25&p=128&hilit=poll#p128 Bojcha: This might be usable for you as well - people only need access to one file on the system. The disadvantage is that it's a bit difficult to change settings this way. The intention was that you can for example write a separate tool that selects different settings during different times of the day. And it's used in a PAL script by Khel973 to select different settings depending on the song: viewtopic.php?f=3&t=34&p=178&hilit=poll#p178 If you only want to give people access to the RDS text, there are 2 possibilities: 1. Use the aforementioned solution, and just let them upload a file with a single line such as: "RDS PS text=1.5s: POWER/1s: FM" or: 2. In the RDS text, you can include a text file. You don't even need the polling mechanism for that, just give people access to a file on the disk where they can write the new RDS text to, and put something like this in the RDS PS field in Stereo Tool: \F"C:\rds_ps.txt" Both are not the most user friendly solutions, but they will work.

Author:	Luke [ Sun Jul 19, 2009 12:44 pm ]
Post subject:	Re: RDS Information over TCP/IP or Serial?
Quote: If someone has access to the PC, password protection won't help at all - they could just close Stereo Tool altogether, change some settings in the .ini file (or remove it), and start it up again. Should be easy enough to create an admin and user accounts and protect it like that.

Author:	Bojcha [ Sun Jul 19, 2009 2:12 pm ]
Post subject:	Re: RDS Information over TCP/IP or Serial?
i'll just wait some better solution for this. Must be simple so anybody can quickly make changes in rds.

Stereo Tool https://forums.stereotool.com/

RDS Information over TCP/IP or Serial? https://forums.stereotool.com/viewtopic.php?t=589	Page 2 of 2

Page 2 of 2	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/