Stereo Tool https://forums.stereotool.com/ |
|
µMPX best practice settings https://forums.stereotool.com/viewtopic.php?f=6&t=31243 |
Page 1 of 1 |
Author: | Minetti [ Wed Dec 15, 2021 12:46 pm ] |
Post subject: | µMPX best practice settings |
Hi all - anyone willing to share their µMPX settings? Like key-frame interval and error correction settings, or choice of bitrate. Is there actually a need to adjust the defaults? |
Author: | Mathijsco [ Wed Dec 15, 2021 2:47 pm ] |
Post subject: | Re: µMPX best practice settings |
No not really, unless your connection is unstable. I'm using 64 (span) / 16 (overhead) for error correction. I'd suggest leaving keyframe interval and bitrate at their default value. |
Author: | Minetti [ Wed Dec 15, 2021 6:06 pm ] |
Post subject: | Re: µMPX best practice settings |
I'm running a test setup right now, and had drop-outs with 64/4, now trying 64/8. |
Author: | 2Sense [ Thu Dec 16, 2021 6:39 am ] |
Post subject: | Re: µMPX best practice settings |
Curious to know what your network is like that is seemingly causing issues? Packet loss, jitter? |
Author: | Minetti [ Thu Dec 16, 2021 8:50 am ] |
Post subject: | Re: µMPX best practice settings |
Now with 64/8 i got lots of messages like: Quote:
2021-12-16 08:40:17.970 info: Recovered 1 blocks
which is not audible.2021-12-16 08:40:20.024 info: Recovered 2 blocks 2021-12-16 08:40:23.409 info: Recovered 1 blocks 2021-12-16 08:40:32.255 info: Recovered 1 blocks 2021-12-16 08:40:32.938 info: Recovered 1 blocks 2021-12-16 08:40:34.971 info: Recovered 1 blocks 2021-12-16 08:40:38.372 info: Recovered 1 blocks 2021-12-16 08:40:51.292 info: Recovered 1 blocks 2021-12-16 08:40:51.975 info: Recovered 1 blocks 2021-12-16 08:40:52.658 info: Recovered 1 blocks 2021-12-16 08:40:53.333 info: Recovered 1 blocks 2021-12-16 08:40:56.733 info: Recovered 1 blocks Internet Connection is both VDSL but on shared connection. I can't correlate the dropouts to high local usage yet. The µMPX is also wrapped in a WireGuard VPN tunnel to make virtually fixed IPs and add some security. µMPX decoder sometimes says it had recovered 1 lost packet but too late so silence was being played. |
Author: | Minetti [ Fri Dec 17, 2021 12:13 am ] |
Post subject: | Re: µMPX best practice settings |
How can I best deal with this: Quote: Audio loss
BTW, I'm running ST 9.83 on Windows, µMPX Decoder on Pi4.
0 Packets missing / 0 Packets too late / 1 Recovered but too late Player 0.158 seconds of silence |
Author: | 2Sense [ Sat Dec 18, 2021 12:10 pm ] |
Post subject: | Re: µMPX best practice settings |
How often do you have audio loss? If it is intermittent, it might be worthwhile setting up some form of network monitoring in an attempt to narrow down the issue? When it occurs, does a traceroute provide any clues? |
Author: | Mathijsco [ Sat Dec 18, 2021 12:30 pm ] |
Post subject: | Re: µMPX best practice settings |
If you get the "recovered but too late" often it could also be an indication of that your recovery span (the 64) is too long compared to your playback delay (buffer). 64 is roughly 2/3s of a second, which means it can do any recovery every 0.66 seconds. If your playback delay is 1 second, it has 0.33 seconds to actually do the recovery before playback needs to happen. You could easily increase the playback delay or decrease the recovery span to find out. |
Page 1 of 1 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |