All times are UTC+01:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: ST sound quality problem
PostPosted: Fri Dec 18, 2020 1:59 pm 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
Hy everyone!

I'm using a Raspberry 3 with St jack + Wolfson audio card. Everything working fine,but only with 48Khz bitrate. I can set till 192Khz,but the sound quality is very bad,only work fine with 48Khz. When I turn off the Stereo tool (bypass) ,on 192Khz the sound quality is perfect again. Looks like ST working normal on 48Khz only. :? Anybody have idea? Cheers.


Top
   
PostPosted: Wed Dec 23, 2020 6:21 am 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
Here is the output spectrum (without audio) with the pilot,from the Cirrus audio card,when I use any sample rate except 48khz.

https://i.postimg.cc/63KCB1J6/20201223-061340.png


Top
   
PostPosted: Wed Dec 23, 2020 10:57 am 

Joined: Wed Dec 04, 2019 6:12 am
Posts: 28
Hi Sandor,

didn't you forget to set the 192kHz sample rate in Stereo Tool?

Image

In the config file you can find it as "Sample rate=" - at this case if you don't use GUI.

Just set it to "Sample rate=192000"

Esetleg beszélhetünk magyarul is, ha úgy egyszerűbb. :)


Top
   
PostPosted: Wed Dec 23, 2020 11:11 am 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
Dear aTom.
Yes, I did not forget set the sample to 192 Khz. I can change the sample rate only in Jack settings,in the stereo tool is not available.

Szia. Először is köszi a vàlaszt. Az a helyzet,hogy minden sample rate-et próbáltam,sikertelenül. Jó minőségben csak 48khz-en megy. Az összes többin olyan a hang,mintha kb 6khz fölött nem szólalnának meg a hangok. Egyszerűen nincs már ötletem...
Esetleg nem tudod le lehet-e tölteni régebbi Tool-t valahonnan? Megpróbálnám másikkal is. Te raspit használsz?


https://i.postimg.cc/GmGKDd7F/20201223-140054.jpg


Top
   
PostPosted: Wed Dec 23, 2020 2:28 pm 

Joined: Wed Dec 04, 2019 6:12 am
Posts: 28
Nem, én a sima windows változatot használom, így sajnos nem valószínű hogy tudok segíteni, ha raspi specifikus a probléma.

Le lehet tölteni régebbi verziókat, a https://www.stereotool.com/download/ oldal alján van hozzá egy útmutató. De gyanítom nem ez lesz a baj.

Mi a cél? Gondolom egy FM transmittert meghajtani MPX jellel, különben nem lenne fontos a 192kHz-es mintavételezés.

Ha a Jack konfigjában beállítod a 192kHz-et, akkor a Stereo Toolban is jól jelenik meg?


Top
   
PostPosted: Wed Dec 23, 2020 2:49 pm 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
Igen,az lenne a cél,hogy a stereo kódolást és az rds-t is a tool végezze. Amikor sample rate-et váltok,változik a toolban is. (A hangminőség is változik,ebből gondolom,hogy "csinál" is valamit.)
Próbáltam letölteni régebbi verziót,ahogy írtad,de page not found lett a vége :-(
Attól tartok Winnek könnyebb dolgom lenne...


Top
   
PostPosted: Wed Dec 23, 2020 3:21 pm 

Joined: Wed Dec 04, 2019 6:12 am
Posts: 28
Igen, ez is tulajdonképpen a javaslatom, hogy amennyiben van rá lehetőség, egy windowsos gépen próbáld meg összerakni a presetet, ami biztosan jól működik. Ha ezek után se megy a pi-n, akkor szinte biztos, hogy valami a konfiggal van, és nem a stereo tool hibája.


Top
   
PostPosted: Wed Dec 23, 2020 3:59 pm 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
A preset rendben van,megy raspin is szépen. Jack beállítva 192Khz-re, tool ekkor bypass módban van,ekkor kifogástalan a hang.Kikapcsolom a bypass módot(a tool működik),ekkor 7.5khz fölött nincs audio(megfelezi a 15khz-et valahogy) és a pilot frekvenciát is megfelezi. :shock:


Top
   
PostPosted: Sat Jan 30, 2021 8:07 am 

Joined: Fri Dec 18, 2020 1:47 pm
Posts: 6
Another problem when I change the sample rate. Sorry for the bad video quality...

https://youtu.be/B_m-SfxbTKE


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC+01:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited