Stereo Tool https://forums.stereotool.com/ |
|
Immediate segmentation fault - Raspberry Pi 4 with JACK https://forums.stereotool.com/viewtopic.php?f=2&t=30936 |
Page 1 of 1 |
Author: | jake [ Tue Jun 29, 2021 11:40 pm ] |
Post subject: | Immediate segmentation fault - Raspberry Pi 4 with JACK |
Hello! I tried searching for my issue but haven't found anyone quite as stuck. I'm currently experimenting with a Raspberry Pi 4 and a HiFiBerry sound card. I'm also using JACK so I can route audio between applications. Unfortunately, I cannot seem to get Stereo Tool to start at all, it immediately fails with a segmentation fault. Code: pi@raspberrypi:~/Downloads $ ./stereo_tool_gui_jack_pi2.1 Thimeo Stereo Tool 9.70 (for Linux with Jack) (C) Thimeo Audio Technology, 2001-2020 jack_client_new: deprecated Segmentation faultMy JACK server and QJackCtl are running, so I don't think it's a problem there. The ALSA version seems to run just fine, but obviously cannot interface with JACK. Please let me know what else I can post to help diagnose this issue. Thanks! Jake |
Author: | jake [ Wed Jun 30, 2021 6:00 pm ] |
Post subject: | Re: Immediate segmentation fault - Raspberry Pi 4 with JACK |
Just wanted to post an update here -- I worked my way backwards through versions of Stereo Tool, one at a time. Version 9.62 still works, everything beyond that immediately seg faults on my Pi4 with the HiFiBerry HAT installed. Code: $ uname -a Linux raspberrypi 5.4.51-v7l+ #1333 SMP Mon Aug 10 16:51:40 BST 2020 armv7l GNU/Linux |
Author: | skinkie [ Wed Sep 08, 2021 7:15 pm ] |
Post subject: | Re: Immediate segmentation fault - Raspberry Pi 4 with JACK |
Can you check which version of JACK you are running? Stereotool seems to be compatible with Jack1 but not with Jack2. |
Author: | AttilaSVK [ Wed Oct 06, 2021 11:05 am ] |
Post subject: | Re: Immediate segmentation fault - Raspberry Pi 4 with JACK |
Same here on a Pi 3B+, tried versions 9.70, 9.62 and 9.50 as well, but they all give me a segmentation fault. Code: pi@raspberrypi:~/Downloads $ ./stereo_tool_gui_pi2 Warning: Cannot set realtime priority, run with sudo for realtime control. Thimeo Stereo Tool 9.81 (for Linux) (C) Thimeo Audio Technology, 2001-2020 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround41 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround50 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline Segmentation faultRunning latest Raspbian 32 bit. Code: pi@raspberrypi:~/Downloads $ uname -a Linux raspberrypi 5.10.17-v7+ #1414 SMP Fri Apr 30 13:18:35 BST 2021 armv7l GNU/Linux |
Author: | hvz [ Sat Oct 16, 2021 12:01 am ] |
Post subject: | Re: Immediate segmentation fault - Raspberry Pi 4 with JACK |
Wait. That last one is NOT the Jack version. So whatever you're seeing must be a separate issue. Please try this: Assuming that you have been able to run Stereo Tool at least once in the last, there must be a file called something like .stereo_tool.rc in your home directory. It's a small text file with the settings. Please rename that file (don't remove it - if this fixes it I would like to get a copy of it so I can investigate what's wrong). Anyway, rename the file to something else (for example .stereo_tool.rc.old), then try to start Stereo Tool again. This will start it with the default settings. So if anything in the saved settings is causing problems this should fix it. |
Page 1 of 1 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |