All times are UTC+01:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Sat Feb 08, 2020 5:14 pm 

Joined: Sun Sep 13, 2015 2:38 am
Posts: 6
The situation:

- Pair of Lenovo ThinkCentre M92p
- Onboard audio (Realtek ALC662 rev3)
- Ubuntu 16.04 x64
- ALSA 4.4.0-142
- Current build of MicroMPX (3.0.0)
- Both machines connected to a single switch for testing

Upon starting the encoder on the first machine, I get messages to this effect, over and over (about 6 times per second):
Code:
2020-02-08 09:45:15.620  warning: Soundcard input overflow detected @ 44634.1
2020-02-08 09:45:15.663  warning: RDS encoder: bits shifted
My first thought was, perhaps the onboard sound card doesn't support 192KHz input - but the waveform and spectrum displays in the web GUI look OK.

When I fire up the decoder on the second machine, the audio plays back at double-speed and pauses repeatedly, and I see messages like these over and over:
Code:
2020-02-08 09:58:45.441  warning: MPX Output buffer full, output stream overwritten
2020-02-08 09:58:45.443  warning: MPX Output buffer full, output stream overwritten
2020-02-08 09:58:45.506  warning: MPX Output buffer full, output stream overwritten
2020-02-08 09:58:45.508  warning: MPX Output buffer full, output stream overwritten
2020-02-08 09:58:45.522  warning: Setting readpos to 216 based on 9088 samples of generated pilot, 13184 samples silence played
2020-02-08 09:58:45.542  warning: Setting readpos to 4312 based on 256 samples of generated pilot, 256 samples silence played
...while, meanwhile, the encoder is saying things like this:
Code:
2020-02-08 09:59:51.015  warning: Soundcard input overflow detected @ 330.015
2020-02-08 09:59:51.057  warning: System time offset detected, time difference is 1.65559 in sample rate measurement
2020-02-08 09:59:51.064  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.122  warning: Soundcard input overflow detected @ 330.123
2020-02-08 09:59:51.171  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.230  warning: Soundcard input overflow detected @ 330.231
2020-02-08 09:59:51.276  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.337  warning: Soundcard input overflow detected @ 330.338
2020-02-08 09:59:51.386  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.445  warning: Soundcard input overflow detected @ 330.446
2020-02-08 09:59:51.494  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.553  warning: Soundcard input overflow detected @ 330.553
2020-02-08 09:59:51.604  warning: RDS encoder: bits shifted
2020-02-08 09:59:51.660  warning: Soundcard input overflow detected @ 330.661
2020-02-08 09:59:51.768  warning: Soundcard input overflow detected @ 330.768
2020-02-08 09:59:51.816  warning: RDS encoder: bits shifted
What am I missing here?


Also, I wonder if anyone knows the command-line arguments for these programs, and/or where the config file (if any) is written? As it sits, I can't reasonably run both the encoder and decoder on the same machine to test things that way - only one can have the use of port 8080, I can't configure them without having access to the web GUI for both, and I can't determine how to change the web GUI port. (Seems builds for other platforms include three binaries - an encoder, a decoder, and a separate command-line interface for both. For Linux x32/x64, the latter seems to be absent.)



--Keith


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+01:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited