Stereo Tool https://forums.stereotool.com/ |
|
Stereo Tool 10.01 BETA https://forums.stereotool.com/viewtopic.php?f=14&t=33391 |
Page 31 of 71 |
Author: | Hitman [ Tue Mar 14, 2023 2:16 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Quote: Quote:
The audio works now, but now I hear some periodic clicks after changing diversity delay, even at 1000ms, they don't seem to go away.
I'm going to need to fix some driver issues; I have one system in which I can hear the output but it doesn't see any input (that's why I didn't notice the 90 dB issue), and another which does see input but I can't hear the output. That's a driver issue; the old version had the same behavior. Anyway, I need to fix it to hear those periodic clicks. I have a suspicion but I need to hear it (on my end, while looking at some logging) to verify.LE: Changing the value a few times seems to make ST crash. Crashing: Which value do you mean? To my knowledge recent ubuntu/debian changed some ways of operation with jackd (scheduling and mixer) that may be problematic, but it's not on driver level, at least for most of it. They say a setup from scratch is recommended. I wish i could've helped more but now I use basic ALSA hardware on pipewire-jack, that attracted me cause it requires basically 0 setup at expense of 20ms more latency or so. (and of course, not utilizing pro gear to full potential) |
Author: | hvz [ Tue Mar 14, 2023 5:44 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Quote: Quote: Quote:
The audio works now, but now I hear some periodic clicks after changing diversity delay, even at 1000ms, they don't seem to go away.
I'm going to need to fix some driver issues; I have one system in which I can hear the output but it doesn't see any input (that's why I didn't notice the 90 dB issue), and another which does see input but I can't hear the output. That's a driver issue; the old version had the same behavior. Anyway, I need to fix it to hear those periodic clicks. I have a suspicion but I need to hear it (on my end, while looking at some logging) to verify.LE: Changing the value a few times seems to make ST crash. Crashing: Which value do you mean? To my knowledge recent ubuntu/debian changed some ways of operation with jackd (scheduling and mixer) that may be problematic, but it's not on driver level, at least for most of it. They say a setup from scratch is recommended. I wish i could've helped more but now I use basic ALSA hardware on pipewire-jack, that attracted me cause it requires basically 0 setup at expense of 20ms more latency or so. (and of course, not utilizing pro gear to full potential) Edit: Whoops. There was a buffer that should be a multiple of the Jack period size, and it wasn't because I added a safety margin to it that wasn't a multiple. That caused both issues. And it could also cause issues if you change the Jack period - I've made it close and re-open the Jack devices now if you ever do that. I have also added checks elsewhere (for other device types) to catch this situation if it ever happens again. |
Author: | hvz [ Wed Mar 15, 2023 11:59 am ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
BETA053 is uploaded. I'll update the opening post of this thread after lunch, but if you want to test you can already download it. |
Author: | Hitman [ Wed Mar 15, 2023 4:44 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Oh yeah, i edited the link and could DL. Glad you got it sorted, the audio issues are fixed now. And very neat, livewire alsa and jack are now together supported, that's great! LE: It seems that after closing ST, it's jack ports take a while to shut down, like a few seconds, if i restart it too quickly it's inputs get duplicated. LE2: hmm a small issue: it doesn't like changing the sample rate to 96khz, it's inputs won't connect. Changing back to 48 works again. |
Author: | hvz [ Wed Mar 15, 2023 4:54 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Quote:
Oh yeah, i edited the link and could DL.
Yes, I'm going to combine everything into a single binary and use dynamic linking for Jack, that will simplify things a lot (on our end as well).Glad you got it sorted, the audio issues are fixed now. And very neat, livewire alsa and jack are now together supported, that's great! Quote: LE: It seems that after closing ST, it's jack ports take a while to shut down, like a few seconds, if i restart it too quickly it's inputs get duplicated.
Hm, odd. So I assume that both of those issues did not occur with the old version?
LE2: hmm a small issue: it doesn't like changing the sample rate to 96khz, it's inputs won't connect. Changing back to 48 works again. |
Author: | Hitman [ Wed Mar 15, 2023 5:09 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Quote:
Hm, odd. So I assume that both of those issues did not occur with the old version?
Yes, prior to b50 those didn't occur.Correction: the first one doesn't occur on normal sample rate, only at 96 it gets stuck at exiting for 5ish seconds. My apologies. At 48 it closes normally. |
Author: | hvz [ Wed Mar 15, 2023 5:18 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
Quote: Quote:
Hm, odd. So I assume that both of those issues did not occur with the old version?
Yes, prior to b50 those didn't occur.Correction: the first one doesn't occur on normal sample rate, only at 96 it gets stuck at exiting for 5ish seconds. My apologies. At 48 it closes normally. When you say "changing the sample rate", do you mean while Stereo Tool is running? I see that that fails here indeed. But the reason appears to be that the Jack instance is gone - I cannot even close it anymore, that returns an error. So I don't think that that can be solved, or can have worked in the old version. I see no issues at different sample rates if I don't touch them while Stereo Tool is running. I have everything loading dynamically now, so I'm going to merge the Jack and non-Jack builds now. No more _alsa and _jack binaries! |
Author: | coxwal [ Wed Mar 15, 2023 11:49 pm ] |
Post subject: | Re: Stereo Tool 10.01 BETA |
I've been running various v10 builds on Windows Server and it's been solid. Trying to switch over to Linux (Ubuntu 22.04) and having lots of issues. Are there known issues with the latest Linux (build 52), or should I keep take better notes and try to post about it? I'm pretty consistently getting a seg fault and then it won't start. I have to rename it to play around again. Also, I can't seem to enable the webserver. I tried 9.92 for fun, and everything works fine. |
Page 31 of 71 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |