Stereo Tool https://forums.stereotool.com/ |
|
Stereo Tool 9.64 BETA https://forums.stereotool.com/viewtopic.php?f=14&t=30345 |
Page 11 of 14 |
Author: | hvz [ Sat Apr 03, 2021 5:10 am ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote:
I got to same conclusion, 'test ON', 'bad' OFF. I was only listening/testing with 'pink noise' at various Clipper level tho.
Wait, "BAD" off?! Off is NOT legacy mode. What I proposed it having both ON (which is equal to before adding them) and remove the settings.Which I think is also what you said before: Quote:
HPF on brings less distortions on pink noise, ofc. And with that ON, (and ofc everyone will use HPF) i dont hear much difference with "test" ON or more distortions caused by bass. maybe even slighlty more bass. BAD has more bass too but also more/always distortions caused by bass.
Edit: I just read back through this thread and I see that I wasn't very clear - I meant that turning "BAD!" *off* would cause those things. But that seems to be the opposite of what you're saying. I'll run some tests, until now I only looked at the code and used reasoning to determine what would happen. Edit 2: I did a quick test, and I heard what I expected: MUCH more highs IMD with BAD! turned off. It's not even a subtle difference. Am I missing something? Or did I misunderstand what you wrote? If not, can you send me audio + preset which shows this? Edit 3: I found that I get the cleanest highs when the first frequency is set to 100 Hz instead of 80 (80, the default GUI-setting, is *just* slightly too low). For a not-insanely-steep filter the 2nd one would need to be set to at least 200 Hz, so I'll replace the values by 100/200 instead of reusing the settings in the GUI. The effect is pretty small, so no setting for this. Recording, "BAD!" on vs off (both bass clipping thresholds at +6 dB): https://soundcloud.com/hans-van-zutphen/bad-on-bad-off |
Author: | MrKlorox [ Mon Apr 05, 2021 7:08 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
I was playing around with Low Level Boost and I was greeted with this error. The software and low boost filter continued to function. Sadly, I don't remember what I did before the error other than the conditions: filter off> changed unknown setting> filter on> error. Stand Alone 964 beta 009 x64, Win10. Attachment: STb964_009-lowboost-01.png [ 12.4 KiB | Viewed 5159 times ] |
Author: | KevGP [ Mon Apr 05, 2021 7:28 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Hi, I found a minor bug. The Basstardizer still has a toggle in the web interface even though I thought the feature has been removed a long time ago. Sometimes, when the toggle is on, the quick adjust section has a Basstizer slider. The slider sometimes disappears though. I cannot find any other options for Basstardizer in the menu under bass settings. Did you forget to remove the toggle and the slider, which appear to still work? |
Author: | Bojcha [ Mon Apr 05, 2021 8:35 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Tested again, "test" ON, and "bad" OFF, that's where 'bug' comes from, 'bad'. |
Author: | hvz [ Mon Apr 05, 2021 10:37 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote:
Hi,
Basstardizer is not removed but hidden - but if it is turned on then it's not hidden. This depends on the "Show deprecated settings" setting under Configuration. Basically, if a setting that we basically think is bad now is set to the wrong (old default instead of new default) value, then we show it, otherwise we hide it. Unless you check "Show deprecated settings", then it's always shown.I found a minor bug. The Basstardizer still has a toggle in the web interface even though I thought the feature has been removed a long time ago. Sometimes, when the toggle is on, the quick adjust section has a Basstizer slider. The slider sometimes disappears though. I cannot find any other options for Basstardizer in the menu under bass settings. Did you forget to remove the toggle and the slider, which appear to still work? I hope this was somewhat clear... |
Author: | hvz [ Mon Apr 05, 2021 10:38 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote:
Tested again, "test" ON, and "bad" OFF, that's where 'bug' comes from, 'bad'.
From having Bad off I assume?
|
Author: | Bojcha [ Mon Apr 05, 2021 11:01 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote: Quote:
Tested again, "test" ON, and "bad" OFF, that's where 'bug' comes from, 'bad'.
From having Bad off I assume?
|
Author: | hvz [ Mon Apr 05, 2021 11:16 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote: Quote: Quote:
Tested again, "test" ON, and "bad" OFF, that's where 'bug' comes from, 'bad'.
From having Bad off I assume?
|
Author: | Bojcha [ Mon Apr 05, 2021 11:37 pm ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote: Quote: Quote: From having Bad off I assume? |
Author: | hvz [ Tue Apr 06, 2021 5:17 am ] |
Post subject: | Re: Stereo Tool 9.64 BETA |
Quote: Quote: Quote: No, when it's off freq sliders don't bug anymore, and less distortions because bass when bass clipper is doing nothing. Also when bad is off, more highs. |
Page 11 of 14 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |