Latest version - Beta 043 (February 24 2021)
Downloads
Changes/bugfixes
- Bug fix: Singleband compressor in Analog mode: Output levels above 0 dB did not always work.
- STX: Entering IP address on screen fails, keyboard disappears. Merge needed.
- True Bass: Added on/off setting for Sub Bass Boost to main page
- Highest vs lowest highs: Created separate setting for non-legacy behavior, difference is too big.
- Update presets
- Add J.C. preset
- Update STX/SST presets
- STX disable most warnings/errors, at least on front panel
- MicroMPX D license
- STX: Login mechanism (at least add password reset/disable): Add reset. Test. Plus: Add "logged in as", then probably disable for this release?
- Update version numbers
- uMPX library issue? (Does not reproduce here, CPU load problem?) - No, was external issue
TODO's
- Stereo Tool Enterprise fixed buffers after changing sample rate, ASIO input channels. To be tested -> BROKEN, wait for update.
- Disable login for release
- Remove soname for D version
- Check for printfs in uMPX library
- Command line version: Show error if .sts file cannot be loaded.
- Check libVLC crash behavior (UEC)
- STX wait for mu fix
- Release
- Highest vs lowest highs setting issue (see post Bojcha)
- Updated Windows non-ASIO latency behavior to be more resilient on systems with high CPU load. To be tested.
- Updated PortAudio to latest version (might fix Mac audio issue, possibly also some Wasapi issues)
- Increased Wasapi/MME/Kernel Streaming latency setting (use ASIO for low latency, this may be more stable) - feedback wanted
- Improved Leif's Highs Gap Protection in non-legacy mode (was introduced in 9.63, but broken in several ways).
- Stereo Tool Enterprise: Several threading/sample rates issues solved, hopefully no bugs are left.
- Add way to override sound card block sizes (at least for Linux, probably also useful for Windows)
- Login: Per session
- Login: Update editable status
- Login: Hide things
- Login: Show warning when trying to change something without access
- Put backup file upload in web interface for MicroMPX
- GTS
- STX: Edit whitelist on unit
- Remote jrtplib
- Create/include BIMP presets
- Stereo Tool Enterprise: Think of good name
- Stereo Tool Enterprise: Switching between devices/channels can go wrong
- Stereo Tool Enterprise: Sample rate mismatch detection is not ok for ASIO inputs
- Pi PiMP stand alone BUSY
- Pi AM stand alone
- ABE GUI BUSY
- Release
- Add "Combp phase"-like test tone to uMPX (FB chat Cleiton Araújo)
- Stereo Tool new I/O framework: Add bypass mode
- MicroMPX: Silence detector with backup player (timeout - threshold - time ok before going back to stream)
- Clipper detect where highs are killed and compensate for that
- Block multiple instances (avoid running multiple Stereo Tool instances with the same settings)
- Later: MicroMPX: Export version, bitrate and redundancy info in webinterface and library
- Later: MicroMPX: Export user messages in library
- Some pages remain visible when you're logged out (password protection)
- Later: STX: Overview page with meters
- Monday: Fill new site BUSY
- Monday: Pens BUSY
- Tuesday: Make multi-instance version available
- Tuesday: Add SST multi-instance interface
- DSP code - on hold
- MicroMPX decoder 2nd port number - with pull-down menu, and indices.
- Stereo Tool priorities: Check what prio 15 things are
- LiquidSoap/Centova setup manual, maybe add some features
- Website BUSY
- Support Contract
- Improve Advanced Limiter shape (Bojcha) -> Problem is not what it seemed to be! There's a memory problem between chunks of audio, solution is to keep track of what happened in the previous block, and keep the previous audio.
- Improve Advanced Bass Distortion Protection
- Compressor with curve drawer
- Disable stereo widening when detecting low bitrate MP3s
- Add a checkbox under Delossifier that makes Absolute Highs fix the highs.
- STX: Verify high frequency tilt behavior
- Put Declipper presets in ST. Selecting one with "APPLY" overrules all existing settings.
- BS412 bug: For Quality > 100, the compressors are off by a few dB (probably 1.5x or 2/3rds).
- How to synchronize HD? THU
-
- Measure HifiBerry stereo separation -> Improved from 35 to 55 dB. Make RC work with Ignore high frequencies -> Later
- Loudness project
- Tom aan de Stegge remarks email 30 september 20:23 - change many defaults
-
- Support rewindowing with different Quality/Size settings. Will give better HPF performance and make lower CPU load possible, and PPM patch points.
- Linux command line version with AES67 input so output can be streamed - seems to be useful... Other options (run a script for the output) might be easier.
- Finish 9 - final uMPX file name issue -> In next 9 update.
- PhoneBooster make multi-threaded if needed (it probably is, esp. for Pi)
- PhoneBooster make Pi version
- MicroMPX needs exception handling, just in case.
- WatchCat replace files instead of placing them elsewhere. For playout systems.
- WatchCat add CMD /C
- Thimeo School
- ABDP remove stuff that's no longer needed? BUSY for low CPU
- Optimize ABDP
- Input and output gain for command line version (like for sound card)
- Dynamic adjustment of priorities
- Sooth effect
- AES67: Add WheatNet
- Installer: Make installer aware of programs like MediaMonkey, AIMP, .....
- HD delay
- Documentation: "Processing" page contains all kinds of BS412 info - why?
- Declipper L/R noise
- Declipper handle resampled audio better (upsample, find oversampling spikes, then detect based on what remains)
- Console version: Read sample rate and bit size from WAV header
- # bands selections should allow option to insert a band instead. Or ask what to do when you change it.
- AES67 thread affinities and priorities
- Add resampler
Quote:
Latest version - Beta 043 (February 24 2021)
Downloads
Changes/bugfixes
- Improved FM clipper high frequency output (more high-highs with little impact on the rest of the sound); turn "Legacy highest vs lowest highs priority behavior" off and adjust the level (lower) if needed.
- Disable Bass Boost if True Bass is disabled
- MicroMPX: Add bitrate (decoder) and level (both) to library interface
Quote:
Latest version - Beta 039/040 (February 18 2021)
Downloads
Changes/bugfixes
- Added MicroMPX specific customer license target (4th)
- Enabled regex in Linux Jack builds.
- STX: Preliminary login mechanism
- Fixed potential low latency reopen bug
Quote:
Latest version - Beta 039 (February 17 2021)
Downloads
Changes/bugfixes
- STX: Add factory reset
- Added L/R band linking/channel separation level compensation, sounds more open, with louder vocals when other instruments kick in.
- Added MicroMPX specific customer license target (3rd)
- Stereo Tool Enterprise: Re-enabled libVLC, not yet tested
- Stereo Tool Enterprise: Some code cleanup, some small issues fixed
Quote:
Latest version - Beta 037 (February 14 2021)
Downloads
Changes/bugfixes
- Error caused by low latency fix (switching latencies could cause lockups) in BETA035, appears to be solved now.
- Stereo Tool Enterprise: Probably fixed an issue with quickly removing/adding an instance
- GUI: Fixed an issue when selecting an empty line in the preset selection pulldown (caused the preset to appear to be unselected).
- STX: Checkbox next to slider: Left part of slider controls checkbox -> Active area was too big
- STX: Size of scopes in top bar not high enough (doesn't seep to respond to zoomfactor) - fixed, but check MicroMPX etc
- STX: Removed Basstardizer from top menu
- STX: Editing PI code was buggy
- STX: Save multiple times creates multiple copies of the preset under Recent presets -> Planned to stack older versions later, leaving this for now.
- STX: Make headphone symbols for difference mode more visibly active, and remove weird block above it when selecting.
Quote:
Latest version - Beta 036 (February 11 2021)
Downloads
Changes/bugfixes
- Low latency mode was broken since an earlier beta
- Enterprise buggy in BETA034, hopefully ok again now - although there are more issues left that might cause problems.
- Add BIMP DeReverb to main path as well
- Bug in ShoutCast code, user:password didn't work
- Put DeReverb also in main path (hidden?)
Quote:
Latest version - Beta 034 (February 8 2021)
Downloads
Changes/bugfixes
- IceCast/ShoutCast streaming was broken on XP, works now
- MicroMPX Decoder library: Export FEC etc info
- MicroMPX library: Support opening multiple instances
- MicroMPX: Added dynamic thresholds in V4. THIS BREAKS COMPATIBILITY WITH EARLIER V4 VERSIONS!
Quote:
Latest version - Beta 029 (January 27 2021)
Downloads
Changes/bugfixes
- Stereo Tool: Selected preset name wasn't displayed if there was only a single preset in the list (which could happen in Recent Presets) since after BETA007
- Stereo Tool: Solved command line version crash when trying to determine where to store settings file, since after BETA007
- Stereo Tool: Closing GUI in Linux was somewhat broken, since BETA007
- Stereo Tool Enterprise: Lots of smaller issues fixed
Quote:
Latest version - Beta 028 (January 24 2021)
Downloads
Changes/bugfixes
- STX: Fix ugly bars in web GUI with zoom factor
- MicroMPX: Add Nice levels
- Stereo Tool Enterprise: 2nd input (BIMP etc) does not work properly.
- Document JSON interface - done, in MicroMPX documentation appendix
- Stereo Tool: Presets were not visible in SAM Broadcaster after startup since after BETA007
- MicroMPX: Report: Enable/disable GPS will keep sweeping as if GPS is on until restart -> No, I don't see that here.
Quote:
Latest version - Beta 022 (January 14 2021)
Downloads
Changes/bugfixes
- 2 w request code log - done test for -a 3, -u Node
- Multi-instance Stereo Tool: First beta
- Backup player make start of dropout count more
- Test STX updater - Ok again
Quote:
Latest version - Beta 021 (January 13 2021)
Downloads
Changes/bugfixes
- Fixed web interface in BETA020, added build script check to assure this won't happen again
- Run Stereo Tool MULTI-INSTANCE as a service: Stopping fails (hangs)
- JSON reset log: How, and add JSON stuff to manual - Also increased maximum number of errors from 10 to 32.
Quote:
Latest version - Beta 020 (January 12 2021)
Downloads
Changes/bugfixes
- MicroMPX V4: Fix 32 bit Pi crash - Compiler bug/feature? (took several days to find/fix)
- BETA018: After closing twice, name of loaded preset disappears (also took several days)
- STX/SST: Shrink everything to 85%, but not MicroMPX (own style?) DONE
- Verify STX installer - Failed, probably fixed
- Mac .zip file installer for VST's - for now anyway DONE
- 2 w zip DONE
- BETA018: Loading presets from webinterface fails
- BETA018: Uploading presets fails. (ST)
Quote:
Latest version - Beta 018 (December 24 2020)
Downloads
Changes/bugfixes
- Save passwords ONLY to .ini file
- Mac builds are now signed for Catalina
- SST error for bad license was not visible
- MicroMPX: New V4 encoding (for testing only, compatibility might still break before release). V4 has a slightly improved encoding at 45% less CPU usage. And it allows bitrates upto 900 kbit (possibly even more)
- MicroMPX library: removed C++11 dependency, added void* for user info for callbacks.
- MicroMPX: Encoder was not enabled in FM Professional EVENT license?
- MicroMPX: Encoder bug in keyframes fixed, for all MicroMPX versions. Could cause some (very soft, -60 dB or so) noise at the start of keyframes.
- MicroMPX: Encoder bug in Huffman table transport fixed, for all MicroMPX versions. Very slightly improves the encoding.
- STX and MicroMPX web interface: Shrunk everything to 80%, waiting for feedback (maybe it's too much?)
Quote:
Latest version - Beta 002 (November 24 2020)
Downloads
Changes/bugfixes
- WatchCat updated!
- "Basic" mode AGC -> Per Band display is bad (other modes as well, just not as bad as this one).
- Backup soundcard doesn't work? - broke in 9.60, fixed now.
- VST2 plugin hangs in Audition on close -> Fixed, closing changed
- MicroMPX library: decoder buffer stuff for customer. Also turn off sound card restarts,
|