Stereo Tool

Thanks so much for working overtime on this. Hope the IBC was productive!

As a reminder to myself, I'm putting the todo list here....

• Enable MicroMPX 3
• Measure Hifiberry noise
• BIMP level controls!
• Add auto-phase-inversion with detection.
• Kantar log file name: Add 1900 to year
• Kantar log files: Make sure directory is always created
• Display LUFS values
• PhoneBooster 48kHz
• Kantar go through checking procedure
• Fixed potential glitch in Normal Output when using multiple threads, mainly noticeable when playing input to output.
• Linux image
• Make Pi for project
• PhoneBooster check filtering - something is broken with the latest build
• PhoneBooster compare with previous (IBC) version
• Discuss web interface
• Make Pi video and ship it THU
• MicroMPX GPS slider
• MicroMPX GPS lock display THU
• PhoneBooster optimize THU
• PhoneBooster change shape or HIYF filtering
• Verify self test
• MicroMPX mu character
• PhoneBooster set fixed quality, latency, samplerate, threads, more?
• PhoneBooster find data for frequencies 7000-8000 Hz.
• Either disable PhoneBooster on bad settings and make it Expert mode, or force good settings when enabled.
• Verify preset saving code on Linux
  -
• Figure out how to dynamically create new GUI structure BUSY THU
• STX self test on multiple units BUSY
• Classical music preset THU
• How to synchronize HD? THU
• Test Framework?
  -
• AGC classical music settings
• Loudness project
• BIMP: Add panning, metering, main audio level; adjust displayed levels? (+6 or 0?)
• Check scheduler, reported to be partially broken in 9.35 (see forum posts)
• Complaint: All (Normal, LL) outputs in Linux go to FM
• Release PhoneBooster beta
• Reduce CPU load as tried at IBC
• Tom aan de Stegge remarks email 30 september 20:23 - change many defaults
  -
• Support rewindowing with different Quality/Size settings. Will give better HPF performance and make lower CPU load possible, and PPM patch points.
• Windows image
• Reverb fix weird sounds on Mac. Several possible causes fixed, waiting for feedback.
• Finish 9 - final uMPX file name issue -> In next 9 update.
• Figure out how to display NMEA/pulse status in GUI. -> Waveform and jitter-view for pulse detection in detail view, GPS in stream, NMEA data, NMEA readable, Pulse detected flags.
• PhoneBooster make multi-threaded if needed (it probably is, esp. for Pi)
• PhoneBooster make Pi version
• Add something to get now playing content from file (but: first figure out how, could be via a separate program or something).
• Streaming output can hang - calls probably need to be moved to a separate thread. ???
• MicroMPX needs exception handling, just in case.
• WatchCat replace files instead of placing them elsewhere. For playout systems.
• WatchCat add CMD /C
• Thimeo School
• ABDP remove stuff that's no longer needed? BUSY for low CPU
• Optimize ABDP
• Input and output gain for command line version (like for sound card)
• Dynamic adjustment of priorities
• Sooth effect
• Crash ProppFrexx
• Update Omnia.SST presets
• AES67: Add WheatNet
• Create file when input fails
• Installer: Make installer aware of programs like MediaMonkey, AIMP, .....
• HD delay
• Document JSON interface
• Documentation: "Processing" page contains all kinds of BS412 info - why?
• Declipper L/R noise
• Declipper handle resampled audio better (upsample, find oversampling spikes, then detect based on what remains)
• Console version: Read sample rate and bit size from WAV header
• # bands selections should allow option to insert a band instead. Or ask what to do when you change it.
• AES67 thread affinities and priorities
• Add resampler

What happened with Delossifier, the "Spectral Hole Filler" appears like "disabled"

_________________
https://fmfeeling.com

Please check that:
- Latency is at least 2048
- Block heavy processing is not turned on

Thank you, was "Block heavy processing is not turned on".

_________________
https://fmfeeling.com

I've updated my version, it does work fine, thanks! It's much more stable than it used to be, and I was already satisfied with the previous version.

What's with Declipper meter?

_________________
control point
control point2

We changed it to show actual declipper action instead of input and output level. So if the Declipper does nothing, it shows nothing now.

O, ok.
Can 150% quality be set separately on meters?

_________________
control point
control point2

How do you mean "separately on meters"? The meters show what the processing is doing - so there's no separate generation of meter values.