Stereo Tool https://forums.stereotool.com/ |
|
Stereo Tool 9.12 BETA https://forums.stereotool.com/viewtopic.php?f=14&t=25593 |
Page 10 of 15 |
Author: | hvz [ Sun Dec 16, 2018 12:53 am ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Quote: Quote:
Were you doing something special or did this happen out of the blue? I found the line of code that must have caused it but it doesn't make much sense to me yet. It would be way more logical if you had just switched between compressor modes for example. (But then you wouldn't have noticed the hiccup).
Only thing changed in this session is to turn on Immersive base, then about an hour later relocate it from before AGC to after AGC. It was running this way for about 30mins, popped up, I grabbed a copy of it to send to you and then acknowledged it.Quote:
O, and has this ever happened before/how long was it running, has it happened since. I'm trying to figure out if this is something that's new in this build (which is unlikely because I haven't touched the compressor code in quite a while) or something that happens very very occasionally and might have been there for a long time already.
First time I have seen it. Here are the last couple of lines of the logfile -:EXCEPTION OCCURRED IN release_ss: ss_inuse[index] EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff60b8554da, read/write=1, r/w location=0x7a80). Offset-info: 0x7ff60bdcd809 --- EXCEPTION OCCURRED IN release_ss: index >= 0 && ss[index] == s --- EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff76ce6492e, read/write=0, r/w location=0x0). Offset-info: 0x7ff76fbba2b9 The first one I have multiple entries for before that one (same offset, different address) but I do not know how old these are... EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff60b8554da, read/write=1, r/w location=0x8780). Offset-info: 0x7ff60bdcd809 Could we add a date/time stamp to the log file entries perhaps? Rossco |
Author: | hvz [ Tue Dec 18, 2018 10:03 am ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Stereo Tool 9.12 BETA018 Windows 32 bit: Windows stand alone: https://www.stereotool.com/download/ste ... 12-018.exe Winamp DSP: https://www.stereotool.com/download/dsp ... 12-018.exe VST 2: http://www.stereotool.com/download/vst_ ... 12-018.dll VST 3: http://www.stereotool.com/download/vst_ ... 2-018.vst3 Windows 64 bit: Windows stand alone: https://www.stereotool.com/download/ste ... 12-018.exe VST 2: https://www.stereotool.com/download/vst ... 12-018.dll VST 3: https://www.stereotool.com/download/vst ... 2-018.vst3 CHANGES:
I know, yet another bass filter. Mathijs was complaining that the bass still didn't sound right. It lacked warmth. We started experimenting, and at some point his reponse was "That's it!". So, we've worked on adding that specific bass. Somehow, I've never missed it, but when I listened to it in my car, I suddenly had the feeling that I was "bathing in bass". Hence the name "Immersive Bass". Interestingly, it is less noticable on my monitor speakers in our office. Earlier filters such as Basstardiser now sound "hollow" in comparison, and I would describe this new bass as "warm". The new "Dutch Chocolate Moose" preset is using it. Still work in progress, but it's close to Dutch Moose, with more of "that" bass. |
Author: | timmywa [ Tue Dec 18, 2018 9:54 pm ] | ||
Post subject: | Re: Stereo Tool 9.12 BETA | ||
Got this error: Running on Intel Core 2 Duo E8600 Win10 Enterprise x64 This is the DSP version Beta 18: -also: Deleted the .ini file as well and am running default Stargate Preset.
|
Author: | hvz [ Wed Dec 19, 2018 9:14 am ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Stereo Tool 9.12 BETA019 Windows 32 bit: Windows stand alone: https://www.stereotool.com/download/ste ... 12-019.exe Winamp DSP: https://www.stereotool.com/download/dsp ... 12-019.exe VST 2: http://www.stereotool.com/download/vst_ ... 12-019.dll VST 3: http://www.stereotool.com/download/vst_ ... 2-019.vst3 BUILD FAILED Windows 64 bit: Windows stand alone: https://www.stereotool.com/download/ste ... 12-019.exe VST 2: https://www.stereotool.com/download/vst ... 12-019.dll VST 3: https://www.stereotool.com/download/vst ... 2-019.vst3 BUILD FAILED CHANGES:
I know, yet another bass filter. Mathijs was complaining that the bass still didn't sound right. It lacked warmth. We started experimenting, and at some point his reponse was "That's it!". So, we've worked on adding that specific bass. Somehow, I've never missed it, but when I listened to it in my car, I suddenly had the feeling that I was "bathing in bass". Hence the name "Immersive Bass". Interestingly, it is less noticable on my monitor speakers in our office. Earlier filters such as Basstardiser now sound "hollow" in comparison, and I would describe this new bass as "warm". The new "Dutch Chocolate Moose" preset is using it. Still work in progress, but it's close to Dutch Moose, with more of "that" bass. |
Author: | timmywa [ Wed Dec 19, 2018 2:17 pm ] | ||
Post subject: | Re: Stereo Tool 9.12 BETA | ||
This one still comes up as Beta 18. With this slightly different error:
|
Author: | hvz [ Wed Dec 19, 2018 2:27 pm ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Quote:
This one comes up as Beta 18. With this slightly different error:
Ow. I was afraid that this would happen (but didn't really expect it).Please answer a few questions: 1. Which OS are you using? 2. What *exact* CPU is in it? 3. Is the GUI still usable? If so, please go to Configuration, set it to "Extreme Tweaker" mode, and check (bottom right) what it says under "CPU features". It might (should) help to change that to a lower setting. Edit: Never mind. Am seeing it here too on an old XP install. Searching for the cause now.... |
Author: | timmywa [ Wed Dec 19, 2018 3:09 pm ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Hans, Running on Intel Core 2 Duo E8600 Win10 Enterprise x64 I can't clear the error. It keeps repeating. Thanks, |
Author: | hvz [ Wed Dec 19, 2018 3:35 pm ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Quote:
Hans,
Yes. It appears that the compiler has done things that I didn't expect. Am trying to figure out now how to avoid that from happening. Debug version is ok, release is not, on older systems/OS's...Running on Intel Core 2 Duo E8600 Win10 Enterprise x64 I can't clear the error. It keeps repeating. Thanks, Edit: Been googling and there doesn't appear to be a good (reliable) solution for this issue. It's a real fringe case of compiler optimization (mis)behavior. Ugh. Will try out some things later today. |
Author: | \_/ [ Wed Dec 19, 2018 4:45 pm ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
DSP beta 19 & 20 are actually the same as beta 18 (bit identical). |
Author: | mapleleaf [ Wed Dec 19, 2018 10:57 pm ] |
Post subject: | Re: Stereo Tool 9.12 BETA |
Hans First of all Season's Greetings I've just installed the ß19 and noticed that when ST is dispalyed that ß18 is seen on the top |
Page 10 of 15 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |