All times are UTC+02:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Thu Dec 23, 2010 10:41 am 

Joined: Thu Dec 23, 2010 10:35 am
Posts: 7
Hello, everybody !

Here is my favourite preset. It allows Winamp to play music with a very constant volume, very heavy trebles, some loudness and a bit little basses.

I'm waiting for your comments.

Here is the code :

[Common]
Pre amplifier=10
Post amplifier=0.930000007
Extra loudness=2
Extra loudness - Very deep bass relative clipping level=0
Extra loudness - Allow extra lows (advanced)=0
Extra loudness - Allow extra highs (advanced)=0
Extra loudness - Punchy=0.224999905
Extra loudness - Max Punch peak=0.75
Extra loudness - Deep bass protection - Enabled=1
Extra loudness - Deep bass protection - Difference=0
Extra loudness - Deep bass protection - Value=0.638750076
Extra loudness - Forcibly remove DC component caused by Loudness=0
Bass protection - Enabled=1
Bass protection - Two steps=0
Bass protection - Clip level=140
Bass protection - Deep bass boost=0
Bass protection - Raise clip level if highs get above=150
Bass protection - Maximum clip level raise=35
Hard limit output=0
[Noise Gate]
Enabled=0
Difference=0
Noise level=1
Relative noise gate level - Band 1=1
Relative noise gate level - Band 2=1
Relative noise gate level - Band 3=1
Relative noise gate level - Band 4=1
Relative noise gate level - Band 5=1
Relative noise gate level - Band 6=1
Relative noise gate level - Band 7=1
[Singleband Compressor]
Enabled=0
Difference=0
Maximum volume=1.5
Attack speed=0.000149978
Decay speed=0.01500234
Above Top Limiter=0
[Pre Compressor]
Enabled=0
Maximum volume - Band 1=35000
Attack speed - Band 1=0.000005
Attack speed - Band 3=0.000005
Decay speed - Band 1=0.00025
Decay speed - Band 3=0.00025
Dual band=1
Third band=0
Relative expected volume of highs=0.649999976
Relative maximum volume of highs=3
Relative maximum volume of very highs=0.330000013
Remove remaining peaks above (relative to maximum volume)=1.75
Maximum expected dynamics strength for smoothing=1
Enable smoothing=0
Smoothing time=10
Gating level=0
Use ITU-BS.1770=0
Channel separation=0.300000012
[Multiband Compressor]
Enabled=1
Difference=0
Delay enabled=0
Maximum volume - Band -1=2540
Maximum volume - Band 0=2540
Maximum volume - Band 1=5080
Maximum volume - Band 2=5080
Maximum volume - Band 3=5080
Maximum volume - Band 4=5080
Maximum volume - Band 5=5080
Maximum volume - Band 6=10000
Maximum volume - Band 7=10000
Maximum volume - Band 8=10000
Attack speeds linked=1
Attack speed - Band -1=0.000019993
Attack speed - Band 0=0.000019993
Attack speed - Band 1=0.000019993
Attack speed - Band 2=0.000019993
Attack speed - Band 3=0.000019993
Attack speed - Band 4=0.000019993
Attack speed - Band 5=0.000019993
Attack speed - Band 6=0.000019993
Attack speed - Band 7=0.000019993
Attack speed - Band 8=0.000019993
Decay speeds linked=1
Decay speed - Band -1=0.003999895
Decay speed - Band 0=0.003999895
Decay speed - Band 1=0.003999895
Decay speed - Band 2=0.003999895
Decay speed - Band 3=0.003999895
Decay speed - Band 4=0.003999895
Decay speed - Band 5=0.003999895
Decay speed - Band 6=0.003999895
Decay speed - Band 7=0.003999895
Decay speed - Band 8=0.003999895
Above Top Limiter=1
Clipping enabled=1
Postprocessing enabled=1
Relative clip position - Band -1=3
Relative clip position - Band 0=3
Relative clip position - Band 1=2.508771658
Relative clip position - Band 2=1.985074759
Relative clip position - Band 3=1.985074759
Relative clip position - Band 4=1.985074759
Relative clip position - Band 5=1.985074759
Relative clip position - Band 6=1.985074759
Relative clip position - Band 7=1.985074759
Relative clip position - Band 8=1.985074759
Final limiter value=0.599999964
Final limiter decay speed=0.4977763
Final limiter clipping=1
Equalizer enabled=0
Equalize before multiband-compression=1
Equalizer position - Band -1=1
Equalizer position - Band 0=1
Equalizer position - Band 1=1
Equalizer position - Band 2=1
Equalizer position - Band 3=1
Equalizer position - Band 4=1
Equalizer position - Band 5=1
Equalizer position - Band 6=1
Equalizer position - Band 7=1
Equalizer position - Band 8=1
[Stereo]
Enabled=3
Stereo AZIMUTH Enabled=0
Stereo Image Enabled=0
Stereo Boost Enabled=1
Stereo Boost Excessive Reverb Protection Enabled=0
Delay enabled=0
Difference=0
Center bass=0
AZIMUTH limit=0
AZIMUTH change speed=0
Image phase amplifier=0
Image phase amplifier maximum angle=180
Image phase amplifier maximum separation strength=100
Image width amplifier=0
Extra phase shift=0
Mono or stereo only=0
Stereo Boost strength=5
Stereo Boost maximum amplification=3
Stereo Boost multiplier=1
Stereo Boost - Never reduce below original level=1
[Channel Delay]
Enabled=0
Left Delay=0
[Output Filter]
Enabled=0
Lowpass filter=15000
Highpass filter=20
Highpass filter linearity=Auto
[Bass Boost]
Enabled=0
Strength=1
Start lowpass frequency of input filter=0
End lowpass frequency of input filter=250
Start lowpass frequency of output filter=250
End lowpass frequency of output filter=350
Clip level=1.5
Clip level is relative to estimated maximum level=1
Preserve louder peaks=1
Difference=0
[Phase Rotator]
Enabled=0
Start frequency=700
Start speed=1400
Number of rotations=4
Smoothness=0.979999959
[Final Limiter]
Enabled=1
Difference=0
Pre-amp=1
Pre-limiter enabled=0
Pre-limiter relative volume=1.75
Reduced CPU processing=0
[FM Transmitter]
Enabled=0
Pre-emphasize=0
Pre-emphasis time=50
Output is pre-emphasized=0
Stereo encoder enabled=0
RDS encoder enabled=0
Pilot signal volume=9
RDS signal volume=4.5
FM overdrive volume=1
RDS PS text=2s:STEREO/2s:TOOL/<1=1.5s,2..-2=2t,-1=1.5s:WWW.STEREOTOOL.COM/|\W"PLAYING %artist% - %title% "/1s:\T2h\:\T02m\:\T02s/1s:\T2h\:\T02m\.\T02s/1s:\T2h\:\T02m\:\T02s
RDS RadioText text=60s:Stereo Tool: Professional Audio Processing - http://www.stereotool.com/30s:Stereo Tool by Hans van Zutphen, 1999-2008 - http://www.stereotool.com/30s:\W"%artist% - %title% - %album%"
RDS PTY=0
RDS PI=65535
RDS Alternative frequency 1=0
RDS Alternative frequency 2=0
RDS Alternative frequency 3=0
RDS Alternative frequency 4=0
RDS Alternative frequency 5=0
RDS Alternative frequency 6=0
RDS Alternative frequency 7=0
RDS Alternative frequency 8=0
RDS Alternative frequency 9=0
RDS Alternative frequency 10=0
RDS Alternative frequency 11=0
RDS Alternative frequency 12=0
RDS Alternative frequency 13=0
RDS Alternative frequency 14=0
RDS Alternative frequency 15=0
RDS Alternative frequency 16=0
RDS Alternative frequency 17=0
RDS Alternative frequency 18=0
RDS Alternative frequency 19=0
RDS Alternative frequency 20=0
RDS Alternative frequency 21=0
RDS Alternative frequency 22=0
RDS Alternative frequency 23=0
RDS Alternative frequency 24=0
RDS Alternative frequency 25=0
RDS TP=0
RDS TA=0
RDS Music=1
RDS Artificial Head=0
RDS Compressed=1
RDS Dynamic PTY=0
RDS RadioText Enabled=1
RDS ClockTime Enabled=1
FM Transmitter Calibration Enabled=0
MPX Oversampling mode=Follow main Quality setting
FM Transmitter Calibration - Volume 20 Hz=1
FM Transmitter Calibration - Volume 40 Hz=1
FM Transmitter Calibration - Volume 80 Hz=1
FM Transmitter Calibration - Volume 160 Hz=1
FM Transmitter Calibration - Volume 320 Hz=1
FM Transmitter Calibration - Volume 640 Hz=1
FM Transmitter Calibration - Volume 1280 Hz=1
FM Transmitter Calibration - Volume 2560 Hz=1
FM Transmitter Calibration - Volume 5120 Hz=1
FM Transmitter Calibration - Volume 10240 Hz=1
FM Transmitter Calibration - Volume 19000 Hz=1
FM Transmitter Calibration - Volume 23000 Hz=1
FM Transmitter Calibration - Volume 28000 Hz=1
FM Transmitter Calibration - Volume 33000 Hz=1
FM Transmitter Calibration - Volume 38000 Hz=1
FM Transmitter Calibration - Volume 43000 Hz=1
FM Transmitter Calibration - Volume 48000 Hz=1
FM Transmitter Calibration - Volume 53000 Hz=1
FM Transmitter Calibration - Volume 57000 Hz=1
FM Transmitter Calibration - Phase shift 20 Hz=0
FM Transmitter Calibration - Phase shift 40 Hz=0
FM Transmitter Calibration - Phase shift 80 Hz=0
FM Transmitter Calibration - Phase shift 160 Hz=0
FM Transmitter Calibration - Phase shift 320 Hz=0
FM Transmitter Calibration - Phase shift 640 Hz=0
FM Transmitter Calibration - Phase shift 1280 Hz=0
FM Transmitter Calibration - Phase shift 2560 Hz=0
FM Transmitter Calibration - Phase shift 5120 Hz=0
FM Transmitter Calibration - Phase shift 10240 Hz=0
FM Transmitter Calibration - Phase shift 19000 Hz=0
FM Transmitter Calibration - Phase shift 23000 Hz=0
FM Transmitter Calibration - Phase shift 28000 Hz=0
FM Transmitter Calibration - Phase shift 33000 Hz=0
FM Transmitter Calibration - Phase shift 38000 Hz=0
FM Transmitter Calibration - Phase shift 43000 Hz=0
FM Transmitter Calibration - Phase shift 48000 Hz=0
FM Transmitter Calibration - Phase shift 53000 Hz=0
FM Transmitter Calibration - Phase shift 57000 Hz=0
[Direct soundcard access]
Enabled=0
Device ID=ERROR: INVALID DEVICEID
Volume=1
Buffer size=1
Send to Winamp=Nothing
ASIO Override channel 1=4
ASIO Override channel 2=5
[Low latency output]
Enabled=0
Device ID=ERROR: INVALID DEVICEID
Volume=1
Buffer size=0.079999998
ASIO Override channel 1=2
ASIO Override channel 2=3


Attachments:
latloud.zip [2.22 KiB]
Downloaded 815 times
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited