All times are UTC+01:00




Post new topic  Reply to topic  [ 143 posts ]  Go to page Previous 17 8 9 10 1115 Next
Author Message
PostPosted: Fri Dec 07, 2018 1:30 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
Quote:
Quote:
Quote:


Ah, it's indeed not switched off when you use limiting. Will fix that.
But would be good to work together :)
Not possible :( unfortunately. Not without big changes in how things work anyway. And then it would still sound weird. So I'm disabling it now, as it should have been.
Damn.. ok then i need to find other way for my new preset. It's so good btw.

_________________
control point
control point2


Top
   
PostPosted: Fri Dec 07, 2018 9:02 pm 
User avatar

Joined: Fri Mar 09, 2018 1:31 pm
Posts: 73
Location: FRANCE
Hello Hans,

here are some different display bugs found

Do you have the same ones on your side ?


Top
   
PostPosted: Sat Dec 08, 2018 4:59 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Stereo Tool 9.12 BETA015

Windows 32 bit:
Windows stand alone: https://www.stereotool.com/download/ste ... 12-015.exe
Winamp DSP: https://www.stereotool.com/download/dsp ... 12-015.exe
VST 2: http://www.stereotool.com/download/vst_ ... 12-015.dll
VST 3: http://www.stereotool.com/download/vst_ ... 2-015.vst3

Windows 64 bit:
Windows stand alone: https://www.stereotool.com/download/ste ... 12-015.exe
VST 2: https://www.stereotool.com/download/vst ... 12-015.dll
VST 3: https://www.stereotool.com/download/vst ... 2-015.vst3


CHANGES:
  • Immersive Bass HPF output not working correctly
  • Immersive Bass HPF input for cleaner sound ? - Difficult to do, doesn't appear to do a lot anyway.
  • Change Advanced Clipper for cleaner voices (less IMD). Very slightly higher CPU load.
  • Preset add Wes, Matt
  • Made Immersive Bass movable (before Auto EQ, before AGC, after AGC - before it was always before AGC).


    OLD CHANGES:
  • Is VST3 ok in vMIX after the latest build? - Should be, works here, and code is more logical.
  • Immersive bass: Removed protection to not add too much again. It didn't have much effect, caused artifacts, and different compressor settings can give a very similar effect.
  • Remove MicroMPX startup logging in Stereo Tool/SST if not running, and put log file in user directory.
  • Linux MicroMPX version (32 bit)
  • Linux MicroMPX version (64 bit)
  • What does the new Immersive Bass display show? Either remove it, or add it to bottom display as well.
  • Immersive bass: Added protection to not add it if it's already there (can be defeated, for now, for testing).
  • Updated Paul Thompson's Breaking Dreams Loud preset - now uses Immersive Bass.
  • Finish Immersive Bass: Add better HPF, tilt, non-lossy adder, update name to Immersive Bass, updated presets.
  • RDS: Remove dynamic memory allocations when the PS/RT/PTYN strings are modified. Pre-allocate enough memory once.
  • RDS UECP: Add support for multiple UECP encoders with different port addresses.
  • RDS UECP: Add support for multiple site/encoder addresses.
  • Add Mathijs' new preset
  • VST3 plugin doesn't work in vMIX - fixed something...
  • Added new bass filter (not yet finished)
  • VST3 64 bit plugin fixed (32 is probably still broken)
  • RDS: UECP: Site and Encoder address were swapped. Fixed, not tested.
  • Optimize Stokkemask post filter
  • CPU load 100% in web thread Linux?
  • No ASIO asserts in debug mode
  • Group 15B also send 4x on TA start (was only doing it on end).
  • Added odd/even harmonics selection in Basstardizer (was only odd before).
  • Nicer input sound card open error handling (softer beeps, retrying and restarting added).
  • RDS: Add PIN to interface
  • VST3 plugin
  • Volume display FM output seems wrong when streaming output is enabled with separate processing. Almost certainly only GUI issue.
  • Noise gate windows audible
  • Auto-select 192 kHz FM output sound card as default
  • No PIN EWS
  • Look at text alignment
  • Split RDS features in standard and advanced RDS (EON, AF method B, ECC, EWS, ODA - TMC etc)
  • RDS AF method B
  • RDS AF method B via UECP Probably done but can't test it now.
  • RDS: RT end at \n
  • White screen in generic plugin - was caused by wrong #ifdef
  • I/O and BIMP missing in web interface.


    TODO:
  • Presets DCM and Cerulean, Magic Gold and Paul: Check BS412 levels. And update Cerulean to 1f
  • Update version number
  • Fix reported crash
  • Update Wes' and Bojcha's preset
  • RDS: Add EON, via GUI and UECP
  • IB Hear function
  • AVX? BUSY
  • Update Mathijs, Wes, Bojcha presets
  • WatchCat GUI glitch
  • Test MicroMPX performance with new gcc on pi
  • Release
    -
  • Clearer split between normal and advanced RDS features
  • Declipper cleanup L-R phase artifacts, maybe also width.
  • Can you please check Pre-Limiter used with Normal limit making some strange effect with thresh under 3-4dB at 64 bands or less.
  • Check new installer script
  • MicroMPX: Add manual (how to setup)
  • Glitch when turning Bypass off
  • 1024x600 screen misses VU meters
  • AAX plugin
  • Right-click tray icon bypass is bad
  • Linux-version MicroMPX integration in ST.
  • Pi 64 bit builds on the site
  • Support for more than 32 ASIO channels
  • Automate generating MicroMPX licenses
  • Backup audio doesn't go to LQLL
  • Finish Kantar tests and integration
  • Brian
  • VST for DJB
  • Test sound card
  • Linux multiple instances
  • Matrix stereo widener BUSY, problem with suddenly loud stereo (goes down in level, makes everything pump - badly). Try running L+R with a slower attack speed, if that doesn't sound good, remove it.
  • Fake stereo idea
  • Cntrct IN
  • Show warning when using MME with wrong sample rate
  • Add a popup for buffer overrun/underrun (also for suspicion)
  • Declipper: Put startup in system tray back in Declipper (at least in the Winamp plugin version).
  • RDS: EON: Support for other type of AF frequencies?
  • uMPX encoder/plugin: Sound card speed message
  • Add MagicRDS AF method B support
  • Noise in declipper issue


I know, yet another bass filter. Mathijs was complaining that the bass still didn't sound right. It lacked warmth. We started experimenting, and at some point his reponse was "That's it!". So, we've worked on adding that specific bass. Somehow, I've never missed it, but when I listened to it in my car, I suddenly had the feeling that I was "bathing in bass". Hence the name "Immersive Bass". Interestingly, it is less noticable on my monitor speakers in our office.

Earlier filters such as Basstardiser now sound "hollow" in comparison, and I would describe this new bass as "warm". The new "Dutch Chocolate Moose" preset is using it. Still work in progress, but it's close to Dutch Moose, with more of "that" bass.


Top
   
PostPosted: Sun Dec 09, 2018 1:40 pm 

Joined: Tue Feb 07, 2017 7:18 pm
Posts: 3
Hi Hans.

When starting version 9.12 beta 15, this exception message appears.

OS: Windows 7 64bit.

Regards.


Attachments:
912B15_Error3.JPG
912B15_Error3.JPG [ 33.24 KiB | Viewed 6184 times ]
Top
   
PostPosted: Sun Dec 09, 2018 8:13 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
Hi Hans.

When starting version 9.12 beta 15, this exception message appears.

OS: Windows 7 64bit.

Regards.
Found it! Caused by Immersive Bass (even if it's turned off) in Low Latency output.


Top
   
PostPosted: Mon Dec 10, 2018 2:06 pm 
User avatar

Joined: Sat Mar 10, 2012 8:15 pm
Posts: 152
Location: Nederland
Immersive Bass breaks down more than you like ;)
But if you listen to everything on laptop speakers and cheap monitors, Then you are already making a big mistake ;)

_________________
Garbage in is Garbage out !


Top
   
PostPosted: Fri Dec 14, 2018 10:06 am 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Stereo Tool 9.12 BETA017

Windows 32 bit:
Windows stand alone: https://www.stereotool.com/download/ste ... 12-017.exe
Winamp DSP: https://www.stereotool.com/download/dsp ... 12-017.exe
VST 2: http://www.stereotool.com/download/vst_ ... 12-017.dll
VST 3: http://www.stereotool.com/download/vst_ ... 2-017.vst3

Windows 64 bit:
Windows stand alone: https://www.stereotool.com/download/ste ... 12-017.exe
VST 2: https://www.stereotool.com/download/vst ... 12-017.dll
VST 3: https://www.stereotool.com/download/vst ... 2-017.vst3


CHANGES:
  • RDS: Add EON, via GUI and UECP
  • IB Hear function didn't work correctly if IB was moved
  • Fixed reported crash
  • Presets DCM and Cerulean, Magic Gold and Paul: Check BS412 levels. And update Cerulean to 1f
  • Update Wes' and Bojcha's preset


    OLD CHANGES:
  • Immersive Bass HPF output not working correctly
  • Immersive Bass HPF input for cleaner sound ? - Difficult to do, doesn't appear to do a lot anyway.
  • Change Advanced Clipper for cleaner voices (less IMD). Very slightly higher CPU load.
  • Preset add Wes, Matt
  • Made Immersive Bass movable (before Auto EQ, before AGC, after AGC - before it was always before AGC).
  • Is VST3 ok in vMIX after the latest build? - Should be, works here, and code is more logical.
  • Immersive bass: Removed protection to not add too much again. It didn't have much effect, caused artifacts, and different compressor settings can give a very similar effect.
  • Remove MicroMPX startup logging in Stereo Tool/SST if not running, and put log file in user directory.
  • Linux MicroMPX version (32 bit)
  • Linux MicroMPX version (64 bit)
  • What does the new Immersive Bass display show? Either remove it, or add it to bottom display as well.
  • Immersive bass: Added protection to not add it if it's already there (can be defeated, for now, for testing).
  • Updated Paul Thompson's Breaking Dreams Loud preset - now uses Immersive Bass.
  • Finish Immersive Bass: Add better HPF, tilt, non-lossy adder, update name to Immersive Bass, updated presets.
  • RDS: Remove dynamic memory allocations when the PS/RT/PTYN strings are modified. Pre-allocate enough memory once.
  • RDS UECP: Add support for multiple UECP encoders with different port addresses.
  • RDS UECP: Add support for multiple site/encoder addresses.
  • Add Mathijs' new preset
  • VST3 plugin doesn't work in vMIX - fixed something...
  • Added new bass filter (not yet finished)
  • VST3 64 bit plugin fixed (32 is probably still broken)
  • RDS: UECP: Site and Encoder address were swapped. Fixed, not tested.
  • Optimize Stokkemask post filter
  • CPU load 100% in web thread Linux?
  • No ASIO asserts in debug mode
  • Group 15B also send 4x on TA start (was only doing it on end).
  • Added odd/even harmonics selection in Basstardizer (was only odd before).
  • Nicer input sound card open error handling (softer beeps, retrying and restarting added).
  • RDS: Add PIN to interface
  • VST3 plugin
  • Volume display FM output seems wrong when streaming output is enabled with separate processing. Almost certainly only GUI issue.
  • Noise gate windows audible
  • Auto-select 192 kHz FM output sound card as default
  • No PIN EWS
  • Look at text alignment
  • Split RDS features in standard and advanced RDS (EON, AF method B, ECC, EWS, ODA - TMC etc)
  • RDS AF method B
  • RDS AF method B via UECP Probably done but can't test it now.
  • RDS: RT end at \n
  • White screen in generic plugin - was caused by wrong #ifdef
  • I/O and BIMP missing in web interface.


    TODO:
  • AVX support
  • Update Mathijs, Wes, Bojcha presets
  • Stereo Tool/SST: Disable MicroMPX if there's not at least SSE2
  • Stereo Tool: Measure effect of EstimateMath defines, try to remove
  • Stereo Tool: Get rid of #ifdef SSE2 in OldSamples
  • Stereo Tool: Kill off old SSE builds
  • WatchCat GUI glitch
  • Test MicroMPX performance with new gcc on pi
  • Remove AVX switch
  • WatchCat on Mac doesn't work
  • Release
    -
  • Clearer split between normal and advanced RDS features
  • Declipper cleanup L-R phase artifacts, maybe also width.
  • Can you please check Pre-Limiter used with Normal limit making some strange effect with thresh under 3-4dB at 64 bands or less.
  • Check new installer script
  • MicroMPX: Add manual (how to setup)
  • Glitch when turning Bypass off
  • 1024x600 screen misses VU meters
  • AAX plugin
  • Right-click tray icon bypass is bad
  • Linux-version MicroMPX integration in ST.
  • Pi 64 bit builds on the site
  • Support for more than 32 ASIO channels
  • Automate generating MicroMPX licenses
  • Backup audio doesn't go to LQLL
  • Finish Kantar tests and integration
  • Brian
  • VST for DJB
  • Test sound card
  • Linux multiple instances
  • Matrix stereo widener BUSY, problem with suddenly loud stereo (goes down in level, makes everything pump - badly). Try running L+R with a slower attack speed, if that doesn't sound good, remove it.
  • Fake stereo idea
  • Cntrct IN
  • Show warning when using MME with wrong sample rate
  • Add a popup for buffer overrun/underrun (also for suspicion)
  • Declipper: Put startup in system tray back in Declipper (at least in the Winamp plugin version).
  • RDS: EON: Support for other type of AF frequencies?
  • uMPX encoder/plugin: Sound card speed message
  • Add MagicRDS AF method B support
  • Noise in declipper issue


I know, yet another bass filter. Mathijs was complaining that the bass still didn't sound right. It lacked warmth. We started experimenting, and at some point his reponse was "That's it!". So, we've worked on adding that specific bass. Somehow, I've never missed it, but when I listened to it in my car, I suddenly had the feeling that I was "bathing in bass". Hence the name "Immersive Bass". Interestingly, it is less noticable on my monitor speakers in our office.

Earlier filters such as Basstardiser now sound "hollow" in comparison, and I would describe this new bass as "warm". The new "Dutch Chocolate Moose" preset is using it. Still work in progress, but it's close to Dutch Moose, with more of "that" bass.


Top
   
PostPosted: Sat Dec 15, 2018 11:10 am 

Joined: Sat Nov 10, 2012 2:16 am
Posts: 106
Location: Australia
Stereo Tool 9.12 BETA017
Windows 64 bit: Windows stand alone

Exception occurred. Able to cancel and processing continued after hearing a small hiccup in audio.
Attachment:
ST9.12-BETA017 Exception.JPG
ST9.12-BETA017 Exception.JPG [ 32.25 KiB | Viewed 5020 times ]
Thanks

Rossco


Top
   
PostPosted: Sat Dec 15, 2018 3:03 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
Stereo Tool 9.12 BETA017
Windows 64 bit: Windows stand alone

Exception occurred. Able to cancel and processing continued after hearing a small hiccup in audio.

ST9.12-BETA017 Exception.JPG

Thanks

Rossco
Were you doing something special or did this happen out of the blue? I found the line of code that must have caused it but it doesn't make much sense to me yet. It would be way more logical if you had just switched between compressor modes for example. (But then you wouldn't have noticed the hiccup).

O, and has this ever happened before/how long was it running, has it happened since. I'm trying to figure out if this is something that's new in this build (which is unlikely because I haven't touched the compressor code in quite a while) or something that happens very very occasionally and might have been there for a long time already.


Top
   
PostPosted: Sun Dec 16, 2018 12:41 am 

Joined: Sat Nov 10, 2012 2:16 am
Posts: 106
Location: Australia
Quote:
Were you doing something special or did this happen out of the blue? I found the line of code that must have caused it but it doesn't make much sense to me yet. It would be way more logical if you had just switched between compressor modes for example. (But then you wouldn't have noticed the hiccup).
Only thing changed in this session is to turn on Immersive base, then about an hour later relocate it from before AGC to after AGC. It was running this way for about 30mins, popped up, I grabbed a copy of it to send to you and then acknowledged it.
Quote:
O, and has this ever happened before/how long was it running, has it happened since. I'm trying to figure out if this is something that's new in this build (which is unlikely because I haven't touched the compressor code in quite a while) or something that happens very very occasionally and might have been there for a long time already.
First time I have seen it. Here are the last couple of lines of the logfile -:

EXCEPTION OCCURRED IN release_ss: ss_inuse[index]
EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff60b8554da, read/write=1, r/w location=0x7a80). Offset-info: 0x7ff60bdcd809
---
EXCEPTION OCCURRED IN release_ss: index >= 0 && ss[index] == s
---
EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff76ce6492e, read/write=0, r/w location=0x0). Offset-info: 0x7ff76fbba2b9


The first one I have multiple entries for before that one (same offset, different address) but I do not know how old these are...

EXCEPTION OCCURRED IN ProcessingChain Thread (Exception 0xc0000005 at address 0x7ff60b8554da, read/write=1, r/w location=0x8780). Offset-info: 0x7ff60bdcd809

Could we add a date/time stamp to the log file entries perhaps?

Rossco


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 143 posts ]  Go to page Previous 17 8 9 10 1115 Next

All times are UTC+01:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited