Stereo Tool https://forums.stereotool.com/ |
|
ST and firewire https://forums.stereotool.com/viewtopic.php?f=22&t=6175 |
Page 1 of 1 |
Author: | GuntherM [ Fri Aug 28, 2015 8:36 pm ] |
Post subject: | ST and firewire |
Hi all, I use different sound cards here, from PCI (Marian and ESI) to PCI-E (Orban) to firewire and the last one a M-Audio 2626 Profire has a strange problem if I use or normal out or the ASIO option and 192Khz sample rate, ST gives a lot of buffering problems when I send out the composite signal to the transmitter, in fact with latency above 2 seconds the problem remains. Seems 192Khz is for this type of soundcard a overload. I reinstalled the suitable latest drivers. But seems a no go for this one. I have also 2 Motu firewire soundcards (normally for the playout system) and these don't have the problem with ST, even better with these I don't need ASIO at all because I can use almost 0.2 ms as output buffer. Does anyone of you users also use a firewire device to feed a transmitter? And do you have problems with it? I hope you can advice me Thanks Gunther |
Author: | hvz [ Fri Aug 28, 2015 10:34 pm ] |
Post subject: | Re: ST and firewire |
Have you tried it with another program instead of Stereo Tool? Just generate a 192 kHz file and play it with any player. |
Author: | GuntherM [ Sun Aug 30, 2015 3:42 pm ] |
Post subject: | Re: ST and firewire |
it's the same with other software, changed the FW cable too, seems 192Khz is a problem (in other modes it's good), so there are a few causes, or the drivers has a bug or the interface internal has a problem. [edit] I noticed also my PPM correlation meter goes crazy (full to the right side) with Winamp, Media Player, Audacity via the M-Audio interface. Same WAV files (stored on a apart server) played on another PC via network is total different Gonna e-mail M-audio about the issue. They have to rebuild a driver for Win10 anyway. If than the problem remains I think it's time to send it back to my audio provider (it has still warranty) Thanks |
Author: | Bojcha [ Mon Aug 31, 2015 3:58 am ] |
Post subject: | Re: ST and firewire |
Can you rise samples for latency on that soundcard? 256 should be enough. |
Author: | Bojcha [ Mon Aug 31, 2015 6:34 pm ] |
Post subject: | Re: ST and firewire |
Did you try to set 512 ? |
Author: | GuntherM [ Fri Sep 04, 2015 4:43 pm ] |
Post subject: | Re: ST and firewire |
Yes, even to 4096, since M-audio isn't very cooperative in this, I send it back to my dealer. Never had issues with M-Audio (I still have a FW Audiophile in my home setup and 2 keyboards) till I bought the 2626 in the beginning lot's of bugs and crashes in the drivers and now this. Return to sender and I hope I get some answers via my dealer. |
Page 1 of 1 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |