Stereo Tool https://forums.stereotool.com/ |
|
tutorial run ST o raspberry Pi 3 stand alone with vlc stream https://forums.stereotool.com/viewtopic.php?f=2&t=25984 |
Page 1 of 1 |
Author: | Tutek [ Sat Apr 13, 2019 9:12 pm ] |
Post subject: | tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
I fought for a long time to run stereotool the way I wanted. Not by jackd only stand alone, where you know what music card is on the input and what's on the output. Therefore I decided to do a tutorial for posterity: P how to run stereotool_gui_pi2 with vlc on raspberry pi3 with generated MPX and RDS. We all know how to download and assign permissions for the program. at the beginning we install pavucontrol. $ sudo apt-get install pavucontrol edit the default.pa file $ sudo nano /etc/pulse/default.pa we're looking for a ruler # load-module module-null-sink and we change to load-module module-null-sink we save the file with changes. we should see null Output in the recording settings on the music card in the vlc program in the Audio tab - audio devices - null output we start alsa first $ jackd -d alsa -p 4096 -n 4 and run stereotool_gui_pi2 in the input card default (ALSA) tab and in FM Output a usb card. I use REIYIN Audio usb 192khz and everything on it is MPX and RDS. http://www.aliexpress.com/w/wholesale-2 ... z-dac.html it is known that it is raspberry but still the quality of the whore is satisfactory considering quality 40% of course, I run everything remotely via PUTTY or ssh. https://streamable.com/gvhft sorry for my english google translate |
Author: | nanonano [ Thu Feb 03, 2022 4:23 am ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
hello brother.. I tried your tutorial on linux but null output does not appear in the input options of the stereo tool.. is there any enlightenment for me? thanks please reply diancoxz7@gmail.com |
Author: | nanonano [ Thu Feb 03, 2022 4:27 am ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
I tried again and again, it couldn't appear on the input of the stereo tool...is it because of the version of the stereo tool.. can i have stereo tool for linux for earlier version which can show null audio |
Author: | san.doz205@gmail.com [ Sun Jun 05, 2022 2:04 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
did you force the output usb sound card to 192khz? I have it working like this, but no stereo and rds. I think its because of a wrong sample rate. I put sample rate in stereotool to 192khz i am using this as output card: https://nl.aliexpress.com/item/10050023 ... 4064%21sea looks like its not running at 192khz: Code: pi@raspberrypi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 7/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: Audio [SONATA HD Audio], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 2: vc4hdmi0 [vc4-hdmi-0], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 3: vc4hdmi1 [vc4-hdmi-1], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 Code: pi@raspberrypi:~ $ cat /proc/asound/card1/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 48000 (48000/1) period_size: 720 buffer_size: 2880 pi@raspberrypi:~ $ |
Author: | san.doz205@gmail.com [ Sun Jun 05, 2022 7:03 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
hmm, i notice that my null output from vlc is mono. ' When i switch VLC to my normal output the stream is stereo. No idea where to fix that edit: sorry, my fault. Of course it is when i switch on 'encode stereo' |
Author: | san.doz205@gmail.com [ Sun Jun 05, 2022 8:40 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
i have ST working with this $4 soundcard: https://nl.aliexpress.com/i/4000049731410.html 192kHz output |
Author: | Tutek [ Mon Jun 13, 2022 5:23 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
my card https://pl.aliexpress.com/item/32955530378.html and works full MPX on linux ( raspberry ) or windows 7 , 8 etc |
Author: | Energy80s [ Wed Aug 31, 2022 9:13 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
Hi, I have a working version of Raspbian / StereoTool v9.52 available as a downloadable SD card image for a Pi3/Pi4 if you want to give it a try. File available here ... https://drive.google.com/file/d/1eC2E4g ... sp=sharing And user guide available here ... https://drive.google.com/file/d/15GqlSb ... sp=sharing It can run with either a live soundcard input or by using VLC as a playback device. This worked well for me last year, so even though the versions of both Raspbian and ST have been updated since then, it should still be fine today. Hope it helps. Rodney. |
Author: | richard_newberry [ Sun Aug 20, 2023 11:56 pm ] |
Post subject: | Re: tutorial run ST o raspberry Pi 3 stand alone with vlc stream |
Hi Rodney, Really nice bit of software you have got there. Can I ask some questions please:- * where did you please the autostart of stereo tool? * whenever you update the software using apt-get update then apt-get dist-upgrade it breaks everything? * my mate is using the rpi 4b with 2Gb RAM it doesn't work on it it says please update software and fails to load up? Any chance you could upset your image to meet the updated requirements of stereo tool, vlc and kernel please? Many thanks Richard Newberry |
Page 1 of 1 | All times are UTC+02:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |