All times are UTC+01:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: input + hd + Fm = no go!
PostPosted: Sun Apr 25, 2021 7:10 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
Configuration:
- No Asio
- Soundcard input
- Same Soundcard Output for FM
- VAC for Normal/HD Output - stream.

For the love of God i can't make it to work. Buffers just going crazy. I can make input to be ok with FM, but then HD is crazy. Or input and HD to be OK, but then FM goes crazy.
Sync on normal output just makes thing worse. Ofc tried all sample rates, nope.
I usually dont have setup like this, but for one PC i need to set it like that.

So why we cant have this to work?

Edit: Found solution. Problem was in VAC settings, needed to change default "Cable Range" to "Cable Format" and "Ms Per Int" from 7 to 1.
So if anyone have similar problems, start from those first.

_________________
control point
control point2


Top
   
PostPosted: Thu Apr 29, 2021 9:09 am 

Joined: Thu Jan 31, 2013 12:04 am
Posts: 112
I had a similar problem, but I had no sound at all, only beeps, and I set the bitrate in cable parameter settings, so no minimum value and maximum value.


Top
   
PostPosted: Thu Apr 29, 2021 11:30 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
It's very strange, for tjis pc i needed "Cable Format" on my personal pc it works with "cable range" (default).

_________________
control point
control point2


Top
   
PostPosted: Mon May 24, 2021 12:36 am 
User avatar

Joined: Mon Feb 24, 2014 7:31 pm
Posts: 77
Quote:
Configuration:
- No Asio
- Soundcard input
- Same Soundcard Output for FM
- VAC for Normal/HD Output - stream.

For the love of God i can't make it to work. Buffers just going crazy. I can make input to be ok with FM, but then HD is crazy. Or input and HD to be OK, but then FM goes crazy.
Sync on normal output just makes thing worse. Ofc tried all sample rates, nope.
I usually dont have setup like this, but for one PC i need to set it like that.

So why we cant have this to work?

Edit: Found solution. Problem was in VAC settings, needed to change default "Cable Range" to "Cable Format" and "Ms Per Int" from 7 to 1.
So if anyone have similar problems, start from those first.
Thanks Bojcha! Thats was the solution for me too.
What is your "Buffer Size / Diversity Delay" setting for each output?
Do you have "Synchronize normal output to other I/O" active?

Thanks again.
Best regards from Chile.


Top
   
PostPosted: Mon May 24, 2021 1:57 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
I use input sync. No Diversity Delay, but i think it'll work just fine.

Also this is kinda not fully VAC problem, more ST problem, i found other softwares works with any VAC mode just fine.

_________________
control point
control point2


Top
   
PostPosted: Mon May 24, 2021 2:44 am 
User avatar

Joined: Mon Feb 24, 2014 7:31 pm
Posts: 77
Thanks Bojcha.
Yes, on my notebook with Win10, the default VAC settings works fine, but PC with Win7... many problems.

Best regards.


Top
   
PostPosted: Wed May 26, 2021 11:09 am 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
I use input sync. No Diversity Delay, but i think it'll work just fine.

Also this is kinda not fully VAC problem, more ST problem, i found other softwares works with any VAC mode just fine.
With the same way of accessing the sound card (ASIO/Wasapi/KS/DirectSound/MME)? Does the new build with block size settings help at all?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+01:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited