All times are UTC+01:00




Post new topic  Reply to topic  [ 143 posts ]  Go to page 1 2 3 4 515 Next
Author Message
 Post subject: Stereo Tool 9.12 BETA
PostPosted: Fri Nov 02, 2018 1:00 am 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Latest version - Beta 24 (Release Candidate 1)
Downloads
Changes/bugfixes
  • Pi build fails
  • Add "^2" mode to pre-bass clipper. Different shape, has less effect on higher frequencies.
  • Update Wes' preset

TODO's
  • (Since beta 3) Add a popup for buffer overrun/underrun (also for suspicion)
  • (Since beta 3) Add MagicRDS AF method B support
  • (Since beta 3) Automate generating MicroMPX licenses
  • (Since beta 3) Backup audio doesn't go to LQLL
  • (Since beta 3) Brian (NAB)
  • (Since beta 3) Cntrct IN
  • (Since beta 3) Declipper: Put startup in system tray back in Declipper (at least in the Winamp plugin version).
  • (Since beta 3) Fake stereo idea
  • (Since beta 3) Finish Kantar tests and integration
  • (Since beta 3) Linux multiple instances
  • (Since beta 3) Linux-version MicroMPX integration in ST.
  • (Since beta 3) Matrix stereo widener BUSY, problem with suddenly loud stereo (goes down in level, makes everything pump - badly). Try running L+R with a slower attack speed, if that doesn't sound good, remove it.
  • (Since beta 3) Noise in declipper issue
  • (Since beta 3) Pi 64 bit builds on the site
  • (Since beta 3) RDS: EON: Support for other type of AF frequencies?
  • (Since beta 3) Right-click tray icon bypass is bad
  • (Since beta 3) Show warning when using MME with wrong sample rate
  • (Since beta 3) Support for more than 32 ASIO channels
  • (Since beta 3) Test sound card
  • (Since beta 3) uMPX encoder/plugin: Sound card speed message
  • (Since beta 3) VST for DJB
  • (Since beta 4) AAX plugin
  • (Since beta 4) Glitch when turning Bypass off
  • (Since beta 4) MicroMPX: Add manual (how to setup)
  • (Since beta 5) 1024x600 screen misses VU meters
  • (Since beta 14) Can you please check Pre-Limiter used with Normal limit making some strange effect with thresh under 3-4dB at 64 bands or less.
  • (Since beta 10) Check new installer script
  • (Since beta 15) Clearer split between normal and advanced RDS features
  • (Since beta 15) Declipper cleanup L-R phase artifacts, maybe also width.
  • (Since beta 21) "Relative adjustment" too low warning
  • (Since beta 23) Check what to do with highs (Bojcha) - maybe next year? Dynamic highs clipping level might work. -> Waiting if needed first, maybe now.
  • (Since beta 24) Speed up start of attack/release? Compare new values with what we're doing, and increase them if the difference is big.
  • (Since beta 24) Fix Basstardizer which broke in 9.20
  • (Since beta 24) Check highs 5 kHz issue in clipper (?)


Older versions
Quote:
Link to post: Version 023

Downloads
Changes/bugfixes
  • Add 2-stage bass clipper in advanced clipper
  • Maybe add 3rd stage to Advanced Clipper? Done, Extreme Tweaker mode and experimental only for now.
  • Check highs issue in Composite Clipper Done, needs different Leif's highs settings (200% instead of 400% seems reasonable).
  • Improve filtering in 2nd bass stage in Advanced Clipper -> No, split into 2 stages. Pre and post.
  • Hide AVX setting
  • Update Dutch Chocolate Moose preset
  • Update Cerulean preset
  • WatchCat on Mac doesn't work -> Installer issue, check before releasing
Quote:
Link to post: Version 022

Downloads
Changes/bugfixes
  • Performance on Windows XP (potentially on all systems without AVX support) is back to normal.
  • Check Basstardizer DIFF mode -> Checked, works fine now, probably an issue with the optimization error in previous beta's
  • Add import/export of IB
  • Fix Mac build
  • WatchCat GUI glitch fixed
Quote:
Link to post: Version 021

Downloads
Changes/bugfixes
  • Fixed AVX/SSE switch (compiler bug workaround) - works on older systems/OS's again.
    About 5% CPU load reduction on newer systems.
Quote:
Link to post: Version 019

Downloads
Changes/bugfixes
  • Stereo Tool: All builds now run on a Pentium 3 :shock: - no separate builds needed anymore...
  • Stereo Tool/SST: Disable MicroMPX if there's not at least SSE2
  • Stereo Tool: Kill off old SSE builds
  • Remove SSE2 check from installers
  • Test MicroMPX performance with new gcc on pi - 2% improvement
Quote:
Link to post: Version 018

Downloads
Changes/bugfixes
  • AVX2 support: Performance improvement on Intel Core i3/5/7 4000+ series when using Windows 7 SP1+/Windows 8/Windows 10
  • Stereo Tool: Measure effect of EstimateMath defines, try to remove - Not needed
  • Stereo Tool: Get rid of #ifdef SSE2 in OldSamples
  • Update Mathijs, Wes, Bojcha presets
Quote:
Link to post: Version 017

Downloads
Changes/bugfixes
  • RDS: Add EON, via GUI and UECP
  • IB Hear function didn't work correctly if IB was moved
  • Fixed reported crash
  • Presets DCM and Cerulean, Magic Gold and Paul: Check BS412 levels. And update Cerulean to 1f
  • Update Wes' and Bojcha's preset
Quote:
Link to post: Version 015

Downloads
Changes/bugfixes
  • Immersive Bass HPF output not working correctly
  • Immersive Bass HPF input for cleaner sound ?
    Difficult to do, doesn't appear to do a lot anyway.
  • Change Advanced Clipper for cleaner voices (less IMD). Very slightly higher CPU load.
  • Preset add Wes, Matt
  • Made Immersive Bass movable (before Auto EQ, before AGC, after AGC - before it was always before AGC).
Quote:
Link to post: Version 014

Downloads
Changes/bugfixes
  • Is VST3 ok in vMIX after the latest build? - Should be, works here, and code is more logical.
  • Immersive bass: Removed protection to not add too much again. It didn't have much effect, caused artifacts, and different compressor settings can give a very similar effect.
  • Remove MicroMPX startup logging in Stereo Tool/SST if not running, and put log file in user directory.
  • Linux MicroMPX version (32 bit)
  • Linux MicroMPX version (64 bit)
Quote:
Link to post: Version 013

Downloads
No downloads available.

Changes/bugfixes
  • Immersive bass: Protection to not add it if it's already there removed too much, now it's a slider.
    Value 1 = same as BETA012, value 10 = same as BETA011. Good range seems to be around 2-3.
    More testing needed.
  • Remove library MicroMPX startup logging
  • Linux MicroMPX version (32 bit)
Quote:
Link to post: Version 012

Downloads
Changes/bugfixes
  • What does the new Immersive Bass display show? Either remove it, or add it to bottom display as well.
  • Immersive bass: Added protection to not add it if it's already there (can be defeated, for now, for testing).
  • Updated Paul Thompson's Breaking Dreams Loud preset - now uses Immersive Bass.
Quote:
Link to post: Version 011

Downloads
Changes/bugfixes
  • Finish Immersive Bass: Add better HPF, tilt, non-lossy adder,
    update name to Immersive Bass, updated presets.
  • RDS: Remove dynamic memory allocations when the PS/RT/PTYN strings are modified.
    Pre-allocate enough memory once.
  • RDS UECP: Add support for multiple UECP encoders with different port addresses.
  • RDS UECP: Add support for multiple site/encoder addresses.
  • Add Mathijs' new preset
Quote:
Link to post: Version 010

Downloads
Changes/bugfixes
  • VST3 plugin doesn't work in vMIX - fixed something...
  • Added new bass filter (not yet finished)
Quote:
Link to post: Version 007

Downloads
Changes/bugfixes
  • VST3 64 bit plugin fixed (32 is probably still broken)
  • RDS: UECP: Site and Encoder address were swapped. Fixed, not tested.
Quote:
Link to post: Version 006

Downloads
Changes/bugfixes
  • Optimize Stokkemask post filter
  • CPU load 100% in web thread Linux?
  • No ASIO asserts in debug mode
  • Group 15B also send 4x on TA start (was only doing it on end).
  • Added odd/even harmonics selection in Basstardizer (was only odd before).
Quote:
Link to post: Version 005

Downloads
Changes/bugfixes
  • Nicer input sound card open error handling (softer beeps, retrying and restarting added).
  • RDS: Add PIN to interface
  • VST3 plugin
Quote:
Link to post: Version 004

Downloads
Changes/bugfixes
  • Volume display FM output seems wrong when streaming output is enabled with separate processing.
    Almost certainly only GUI issue.
  • Noise gate windows audible
  • Auto-select 192 kHz FM output sound card as default
  • No PIN EWS
  • Look at text alignment
  • Split RDS features in standard and advanced RDS (EON, AF method B, ECC, EWS, ODA - TMC etc)
Quote:
Version 003

Downloads
Changes/bugfixes
  • RDS AF method B
  • RDS AF method B via UECP
    probably done but can't test it now.
  • No more white screen in generic plugin
    was caused by wrong #ifdef
  • I/O and BIMP no longer missing in web interface


Top
   
PostPosted: Fri Nov 02, 2018 1:27 am 

Joined: Mon Dec 12, 2011 5:02 pm
Posts: 123
Quote:
Stereo Tool 9.12 BETA003

CHANGES:
  • RDS AF method B
  • RDS AF method B via UECP Probably done but can't test it now.
    .....
Thank you for this! Was waiting for RDS method B.
Now I need to find some time to test it :)


Top
   
PostPosted: Fri Nov 02, 2018 3:22 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
All text in gui aligned to left on meters and boxes with some errors at brightness 93. Not all skins.

edit: 'center text' wooh

_________________
control point
control point2


Top
   
PostPosted: Fri Nov 02, 2018 3:46 am 
User avatar

Joined: Tue Mar 17, 2009 2:56 pm
Posts: 4151
What's with to-do list where was option to hide non-used filters/meters?

_________________
control point
control point2


Top
   
PostPosted: Mon Nov 05, 2018 4:15 pm 

Joined: Mon Dec 12, 2011 5:02 pm
Posts: 123
Method B through UECP doesn't work.
However - method B works in ST, but I don't think that it works right.


Top
   
PostPosted: Mon Nov 05, 2018 9:23 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
Method B through UECP doesn't work.
However - method B works in ST, but I don't think that it works right.
I haven't tested method B via UECP yet so that's very well possible.

But, what's wrong with normal AF method B?


Top
   
PostPosted: Mon Nov 05, 2018 9:58 pm 

Joined: Mon Dec 12, 2011 5:02 pm
Posts: 123
Quote:
Quote:
Method B through UECP doesn't work.
However - method B works in ST, but I don't think that it works right.
I haven't tested method B via UECP yet so that's very well possible.

But, what's wrong with normal AF method B?
Hans, I got too many duplicated frequencies in pira's RDS spy.
Will have to check it out once more.


Top
   
PostPosted: Tue Nov 06, 2018 4:52 am 
User avatar

Joined: Thu Apr 07, 2011 2:37 am
Posts: 148
Location: Napier, New Zealand
Streaming AAC-HE using VLC input causes the GUI to stop/start/stop/start every ~300ms
The audio keeps playing fine.

For example, put this in as a stream source: http://radio.muppetz.com:5001/brianfm64

An MP3 stream (http://radio.muppetz.com:5001/brianfm) doesn't exhibit this.

_________________
I just use ST Winamp to listen to music.


Top
   
PostPosted: Tue Nov 06, 2018 4:16 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
Streaming AAC-HE using VLC input causes the GUI to stop/start/stop/start every ~300ms
The audio keeps playing fine.

For example, put this in as a stream source: http://radio.muppetz.com:5001/brianfm64

An MP3 stream (http://radio.muppetz.com:5001/brianfm) doesn't exhibit this.
Ah, that purely depends on how the stream comes in. If that's in bursts, then everything (including the GUI) will be updated in bursts.


Top
   
PostPosted: Tue Nov 06, 2018 4:16 pm 
Site Admin
User avatar

Joined: Mon Mar 17, 2008 1:40 am
Posts: 11185
Quote:
Quote:
Quote:
Method B through UECP doesn't work.
However - method B works in ST, but I don't think that it works right.
I haven't tested method B via UECP yet so that's very well possible.

But, what's wrong with normal AF method B?
Hans, I got too many duplicated frequencies in pira's RDS spy.
Will have to check it out once more.
Hm, I checked it with that. So.... can you show a screenshot or something like that? Thanks...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 143 posts ]  Go to page 1 2 3 4 515 Next

All times are UTC+01:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited