Stereo Tool
https://forums.stereotool.com/

Stereo Tool 8.30
https://forums.stereotool.com/viewtopic.php?f=14&t=16276		 Page 3 of 5
Author:  Chris [ Sat Apr 15, 2017 1:53 pm ]
Post subject:  Re: Stereo Tool 8.30
No i could nt remove the popup.! I was changing pressets
I will try the latest now.. if i found any problem i will let you know


Yes it happened in the latest Beta too.! reproduce by changing pressets and saving them
Author:  radio700 [ Sat Apr 15, 2017 2:21 pm ]
Post subject:  Re: Stereo Tool 8.30
Quote:
This looks like a VLC error. But, does this only happen at restarts, and always happen at restarts? And not if you just set it up? What happens if you disable it, then start ST, and then enable it?

Whatever it is, the cause appears to be in VLC, more specifically in libavcodec. The good news is that this is the first evidence that my code to handle VLC crashes is working. You can enable the automatic restarts to have it attempt to restart when this happens. Now that won't help much if this happens on every restart, obviously...
Once activated and ST closed and reopened ST won't work anymore and crash on every start.
Author:  hvz [ Sun Apr 16, 2017 12:49 am ]
Post subject:  Re: Stereo Tool 8.30
Quote:
Quote:
This looks like a VLC error. But, does this only happen at restarts, and always happen at restarts? And not if you just set it up? What happens if you disable it, then start ST, and then enable it?

Whatever it is, the cause appears to be in VLC, more specifically in libavcodec. The good news is that this is the first evidence that my code to handle VLC crashes is working. You can enable the automatic restarts to have it attempt to restart when this happens. Now that won't help much if this happens on every restart, obviously...
Once activated and ST closed and reopened ST won't work anymore and crash on every start.
Ok, that has to mean that I'm doing something with VAC differently on startup than when you turn it on later.
Author:  radio700 [ Sun Apr 16, 2017 1:12 pm ]
Post subject:  Re: Stereo Tool 8.30
Quote:
Ok, that has to mean that I'm doing something with VAC differently on startup than when you turn it on later.
The only way get it back working setting the Normal Output to =0 in the config-file and restart ST. Afterwards you can activate VLC Streaming without any problems until the next restart.
Author:  hvz [ Sun Apr 16, 2017 1:39 pm ]
Post subject:  Re: Stereo Tool 8.30
Quote:
Quote:
Ok, that has to mean that I'm doing something with VAC differently on startup than when you turn it on later.
The only way get it back working setting the Normal Output to =0 in the config-file and restart ST. Afterwards you can activate VLC Streaming without any problems until the next restart.
Ok. That must indeed be what I said above. Will look into it...... (after NAB though)
Author:  hvz [ Mon Apr 17, 2017 1:43 am ]
Post subject:  Re: Stereo Tool 8.30
Quote:
Quote:
Ok, that has to mean that I'm doing something with VAC differently on startup than when you turn it on later.
The only way get it back working setting the Normal Output to =0 in the config-file and restart ST. Afterwards you can activate VLC Streaming without any problems until the next restart.
I had a quick look when I was working on something else and I think I found it. Due to 2 lines of code that were swapped, ST always opens the sound cards twice on startup. That's stupid...and fixed now. Will post a new beta.
Author:  hvz [ Mon Apr 17, 2017 4:39 am ]
Post subject:  Re: Stereo Tool 8.30
Windows 32 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 31-005.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 31-005.exe
VST: http://www.stereotool.com/download/vst_ ... 31-005.dll

Windows 64 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 31-005.exe
VST: http://www.stereotool.com/download/vst_ ... 31-005.dll

CHANGES:
- VLC crashing issue on restarts probably fixed: Sound cards were opened twice on startup. (Open -> Close -> Open). Which might have caused this.
- Generic plugin: Button presses now handled if GUI is closed (use '1' as parameter index value).

OLD CHANGES:
- Stokkemask crash/audio drop fixed (when changing the Use area setting and Assymmetry mode was enabled)
- Limiter sliders were hard to control -> solved
- SST: Error popup is now red, clicking on "Clear all errors" removes the popup.
Author:  radio700 [ Mon Apr 17, 2017 12:00 pm ]
Post subject:  Re: Stereo Tool 8.30
Hi Hans,

thank you, I'll give it a try later. I'm testing now the PI2 Version on a PI3 with HifiBerry Card and GUI-less. When I start I get the following errors:
Quote:
Thimeo Stereo Tool 8.30 (for Linux with Jack) (C) Hans van Zutphen, 2001-2017
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround41
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround50
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm_direct.c:896:(snd1_pcm_direct_initialize_slave) slave plugin does not support mmap interleaved or mmap noninterleaved access
ALSA lib pcm_dmix.c:1034:(snd_pcm_dmix_open) unable to initialize slave
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
Note: Cannot open display. Running without GUI.
StereoTool isn't running afterwards. Am I doing something wrong? I'd like to get it working with ALSA.

Thanks.

Christian
Author:  dj_szpajda [ Mon Apr 17, 2017 12:14 pm ]
Post subject:  Re: Stereo Tool 8.30
Hmm I thik controlled distortion do nothing? I tried everything on many test tones and always no effect..
Author:  radio700 [ Mon Apr 17, 2017 1:08 pm ]
Post subject:  Re: Stereo Tool 8.30
Unfortunately the new beta doesn't fix the problem.

Attachments:
ST_ERROR.PNG
ST_ERROR.PNG [ 71.69 KiB | Viewed 8081 times ]
Page 3 of 5 All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/