Jesse,
Hey, perhaps the song track 'Father of Mine' by Everclear may help sort out the ducking issue... After processing on Lakes setting, the vocals are super clear, but as soon as the instrumentals start, his voice goes way deep behind everything else, and its almost hard to hear the guy...
Oh, I also notice the setting uses simple clipper instead of the advanced clipper. Is this by design, or has the preset not been updated for the advanced clipper?
Also, on the HD settings, there are a couple settings that look like they could be increased for maximum quality, but again was not sure if this was on purpose (I use it offline, so no constraints on time/cpu power
)
The overridden settings below did a fantastic job with Death Magnetica... Although the processing speed for track 2 - end of the line, increased from taking about a minute to just over 14 minutes to process, about 1/2 of real time.
[Absolute Highs]
Auto detect highpass filter=0
Before Multibands=After Multibands
Difference=0
Effect strength=1
Highpass filter follows Delossifier=1
Highs - 1 Band (7.85 BETA008)=0
Highs - Band distance=0.5
Highs - Block during collection of shape=0
Highs - Oversampled=1
Highs - Shape width=32
Highs On=1
Maximum working above=9200
Peak Distance Maximum=1000
Peak Distance Multiplier=2.5
Slope up to=11025
Threshold (gate)=0
[Declipper]
Amount of peak samples to remove - long term=0.310000002
Amount of peak samples to remove - short term=0.620000005
Analog input=0
Clipped if below short term margin=0.270000011
Clipped if below short term margin Enabled=1
Clipping straight line margin=0.449999988
Declip if (type)=3
Declip if type 4 long term margin=0.919999957
Definitely clipped if below (relative)=0.970000029
Do not allow restored peaks to be lower than clipped signal=0
Do not reconstruct if reconstructed signal resembles original - texture threshold=0.899999976
Do not reconstruct if reconstructed signal resembles original - threshold=0.899999976
Dynamically increase maybe clipped level=1
Dynamically increase probably clipped level=1
Enabled=1
MP3 input=1
MP3 margin=1
MP3 number of samples=0
Maximum expected distortion level=0.75
Maximum restored peak=4
Maybe clipped if below (relative)=0.670000017
Not clipped if below (absolute)=4095
Only declip if clipping histogram spike is symmetrical=0
Only declip if tilt can be determined=0
Probably clipped if below (relative)=0.800000012
Quality=99.999984741
Reduction precision=1
Tilt default level=0.016666651
Tilt level detection enabled=1
Tilt maximum adjustment per measurement=0.027777778
Tilt maximum level=0.25
Tilt minimum level=-0.25
Veil after spike down speed (dB/ms)=1.159999967
Veil margin=0.899999976
Veil normal down speed (dB/ms)=0.439999998
Veil speed drop time reduction time after spike (ms)=1.620000005
[Delossifier]
Difference=0
Enabled=1
Left channel only (testing)=0
Maximum relative volume reduction=2
Pre-ringing killer enabled=1
Spectral hole filler - Detect MPEG=1
Spectral hole filler - Difference=0
Spectral hole filler - Enabled=1
Spectral hole filler - Minimum frequency=600
Spectral hole filler - Reconstruct top part=1
Spectral hole filler - Reconstruct top part if likely=0
Spectral hole filler - Reconstruct top part if likely - Slow rise=1
Spectral hole filler - Reconstruct top part if likely - Slow rise - Avoid highs flutter=1
Spectral hole filler - Reconstruct top part if likely - Slow rise - Avoid highs flutter - Stronger=0
Spectral hole filler - Show histograms=0
Spectral hole filler - strength=1.410000205
Spectral hole filler - threshold=4.999999523
[Dequantizer]
Block sizes=All
Enabled=1
Input bits=16
Maximum reduction=2
Quality=1
Reduction precision=1
Reduction start=1
Attachment:
File comment: All settings maxed (many beyond the limits in the GUI interface)
Jesse Graffam - Minnesota Lakes v0.01.57 HD_MAX Qualityv2.sts [87.65 KiB]
Downloaded 510 times